First post, by PKFreeZZy
Hello,
Just received an Intel RC440BX motherboard in the mail today and was pretty excited to try it out... Only it appears to have other plans for me.
The board boots up and POSTs just fine, no fatal errors or anything. However, even if there are IDE hard drives connected, it still tries to force boot from floppy.
Naturally, I tried entering the BIOS, except that doesn't seem to be working either. It tells the user to press F2 after POSTing, which, if done, displays "Entering SETUP..." in the bottom left... Except it never does. This message flashes a couple of times, then the motherboard reports keyboard status and proceeds to the same floppy error.
Any ideas what might be going on with it?
My Windows 98 PC: Slot 1 Pentium III 600 (Katmai) | 256MB PC133 SDRAM | 64MB Leadtek WinFast GeForce2 Pro | Creative SB16 CT2230 | Intel PRO/100+ with Alert on LAN* | 18.64GB Seagate ST320011A | Corsair CX430 | ASUS P2B Rev. 1.04