First post, by Dan386DX
- Rank
- Member
First an apology, I've been spamming this place with Socket 7 related woes.
I have yet another PCChips motherboard, this time a M598LMR V5.0 Socket 7.
and ST 6x86 133MHz and 64MB 133MHz RAM. The chipset is SiS 530.
It works but as soon as I install the driver for onboard graphics, then restart the system as normal, Windows won't load - throws a "Windows protection error. You need to restart your PC" - further restarts will sometimes actually get through to Windows, and under display driver in Device Manager, SiS 530 is shown and appears to be working. Except it's stuck in 256 colour mode at 640 x 480. Attempts to change these fail.
I've tried different RAM, different BIOS settings, and both Win 95 and Win 98. The problem remains the same.
The driver I'm using is 1.08 from theretroweb but I've also tried 1.06 and had identical results.
So, am I looking at a faulty chipset IGP? Anything else I can try?
Also, if somebody could link a flash utility I could try with the final BIOS for this board, I'd be grateful. It's AMI but my version of AFUDOS doesn't like the rom.
Thank you!
90s PC: IBM 6x86 MX 233MHz. TNT2 M64. 256MB RAM, 2GB CompactFlash.
Boring modern PC: i7-12700, RX 7800XT. 32GB/1TB.
Fixer upper project: NEC Powermate 486SX/25. 16MB/400MB.