Hey i have a problem i have installed driver for sound card but i only hear sound but no music from doom 2 even though that i already have set sound and music to sound blaster or general midi from setup.exe does anyone know how to fix this?
Can you provide more info?
A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Creative AWE64 Value ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!
dominusprog wrote on 2024-07-26, 20:43:Can you provide more info?
Maybe we need one of this
dominusprog wrote on 2024-07-26, 20:43:Can you provide more info?
I also have tried to install dos drivers but still no music i have CREATIVE - PCI SOUND CT5808 sound card
And if I assume you run pure MSDOS here and the DIAGNOSE.EXE you got with the DOS drivers plays both digitized sounds and music, am I correct?
GA-G41M-Combo G41/ICH7 - Core 2 Quad Q9550 - DDR3 1033 - Radeon RX570 - YMF744 (Cobra) - X3MB (Buran)
Beetle/M/i815+ICH2 - Celeron 566Mhz - Opti 924 (Typhoon Media)
Remove the previously installed drivers and install this one.
A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Creative AWE64 Value ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!
dominusprog wrote on 2024-07-27, 16:25:Remove the previously installed drivers and install this one.
I have installed the driver you sent me and it's not working now there's no sound and music in doom 2 only sound was working before in doom 2 on previous sound driver
What about Windows, is it working?
A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Creative AWE64 Value ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!
dominusprog wrote on 2024-07-28, 23:27:What about Windows, is it working?
Yes
A proper Sound Blaster PCI 128 driver install should have DOS drivers located in C:\PROGRA~1\CREATIVE\AUDIO\DOSDRV and set a SBPCI variable for that path (along with BLASTER)
From MS-DOS mode, type in
%SBPCI%\SBINIT
and it should initialize the card for use in DOS games.
leileilol wrote on 2024-07-29, 17:53:A proper Sound Blaster PCI 128 driver install should have DOS drivers located in C:\PROGRA~1\CREATIVE\AUDIO\DOSDRV and set a SBP […]
A proper Sound Blaster PCI 128 driver install should have DOS drivers located in C:\PROGRA~1\CREATIVE\AUDIO\DOSDRV and set a SBPCI variable for that path (along with BLASTER)
From MS-DOS mode, type in
%SBPCI%\SBINITand it should initialize the card for use in DOS games.
I don't know how do to that i don't have much experience with this but here is my config.sys and autoexec.bat current configs look attachments
