Issue with a M825 Socket 462 motherboard \ VOGONS

Issue with a M825 Socket 462 motherboard

Topic actions

First post, by Linoleum

Posted on 2025-01-04, 16:03

Linoleum Offline

Rank Member

Rank: Member
Posts: 274
Joined: 2023-08-29, 02:19
Location: Canada

I am having problems with a PCChips M825 I recently got... I am trying get a Duron 900 running on it and can't get to it to post. I did the following:

Changed the battery
Made sure FSB was at 100mhz
Caps all look pristine
Tried few different RAMs and GPUs
Tried two different PSUs (see pictures for specs, 12v and 5v rails are ok)

On my PC Analyser Card, I get AMIBIOS codes 07-08.

07: "Fixes CPU POST interface calling pointer"
08: "Initializes the CPU. The BAT test is being done on KBC. Program the keyboard controller command byte is being done after Auto detection of KB/MS using AMI KB-5."

That sounds like a lot could be wrong for a single error code! Any idea of what exactly could be wrong and how to fix?

P3 866, V3, SB Audigy 2
P2 300, TNT, V2, SB Audigy 2 ZS
P233 MMX, Mystique 220, V1, AWE64
P166, S3 Virge DX, SB32, WavetablePi & PicoGus
486DX2 66, CL-GD5424, SB32, SC55
Prolinea 4/50, ET4000, SB16, WavetablePi
SC386SX 25, TVGA8900, Audician32+

Reply 1 of 2, by paradigital

Posted on 2025-01-04, 16:09

paradigital Offline

Rank Oldbie

Rank: Oldbie
Posts: 757
Joined: 2020-05-04, 16:40
Location: Cheshire, UK

Your POST analyser is showing the last TWO codes, it’s only freezing on one of them.

Seems to me that most of the functions defined in 08 relate to the inability to address the keyboard controller.

Trying another CPU (or trying the current CPU in another board) would rule out the “Initializes the CPU” portion of 08.

Reply 2 of 2, by Linoleum

Posted on 2025-01-05, 17:26

Linoleum Offline

Rank Member

Rank: Member
Posts: 274
Joined: 2023-08-29, 02:19
Location: Canada

paradigital wrote on 2025-01-04, 16:09:

Your POST analyser is showing the last TWO codes, it’s only freezing on one of them.

Seems to me that most of the functions defined in 08 relate to the inability to address the keyboard controller.

Trying another CPU (or trying the current CPU in another board) would rule out the “Initializes the CPU” portion of 08.

Darn it... All I could find was a late socket 462 (sempron 3000). This one worked! Although specs mentions the board was compatible with any Athlons and Durons... Well it's not!

Go to top of page Go to top of page

Back to General Old Hardware