VOGONS

Fix Voodoo Rush, need help.

Topic actions

First post, by zwrr

Posted on 
User metadata
Rank Member
Rank
Member

I got an ATC-2475 card, its 2D works fine, but the 3D has no textures. I re-soldered the FJR and TMU chips on the card, checked for loose pins, and then I tried re-soldering all the chips on the card, ensuring that there were no loose or damaged capacitors, but the problem remains unresolved.I hope to get your help.

The attachment 1.jpg is no longer available
The attachment 2.jpg is no longer available
The attachment 3.jpg is no longer available

SBC1: Cyrix 5x86-120, HS-5x86HVGA, 16MB EDO, GD54M30, SB16 CT2770, HardMPU-wt
SBC2: VIA C3-800, PCISA-C800, 128MB SDRAM, TNT2 PCI, SB AWE64 Gold
SBC3: Tualatin-S 1.4G, PCI-6872, 256MB SDRAM, FX5200 PCI, Voodoo2 SLI, SB Live

Reply 1 of 1, by byte_76

Posted on 
User metadata
Rank Member
Rank
Member

I don’t have an answer to your question but it might help if you post detailed pics of both sides of the card. (And this will bump the thread again)

Are you 100% sure that there are no bridges between the pins of the framebuffer and texture mapping chips?

What happens if you gently flex the board or press on the components like the memory while the PC is running and displaying the blueish color.

Did you feel for components that are unusually hot?

Go to top of page Go to top of page
Back to Video
Close window
Close window