AMD k6-2+ 1.5v at 2,0v \ VOGONS

AMD k6-2+ 1.5v at 2,0v

Topic actions

First post, by slash032

Posted on 2026-04-25, 21:37

slash032 Offline

Rank Newbie

Rank: Newbie
Posts: 9
Joined: 2024-10-30, 18:53
Location: France

Hello
I've got an AMD k6-2+ 350mhz stepping AUZ which is running at 1.5v. Minimum voltage on my Asus P5A-B is 2,0v. Do you think i can boot motherboard at 2,0v with this cpu? I've search and gigabyte Ga5aa is the only board with 1,5v posibility.

The attachment IMG20260425233459.jpg is no longer available

Il n'y a pas de citadelle imprenable, il n'y a que des assauts mal menés

Reply 1 of 2, by rmay635703

Posted on 2026-04-25, 21:41

rmay635703 Offline

Rank l33t

Rank: l33t
Posts: 2080
Joined: 2019-01-19, 19:32

I used to do that all the time the low volt models almost all would OC to 450mhz +

Reply 2 of 2, by nickles rust

Posted on 2026-04-26, 01:02

nickles rust Offline

Rank Newbie

Rank: Newbie
Posts: 95
Joined: 2025-02-17, 18:09

That is one of the later K6 chips I've seen (2003). I suppose it was sold for an embedded/industrial application, but it should work fine at 2v. I would not go much above 2.1v and it will need a decent cooler.

Go to top of page Go to top of page

Back to General Old Hardware