5185 3DMARK 2000
324 CPU score
Changed the motherboard from a GA 5 AX Rev 4.1, to the P5A-B Rev 1.04.
3.8VIO setting allowed the CPU to run at 5.5x115FSB, I was stuck at 6x105=630mhz on the GA5 since it stuck at 3.5v VIO.
CPU is a K6-3+ 400 ATZ using 2.4v.
PNY GF3 TI200@ 220x460
Nvidia 7.76 Det. GPU driver
ALI 1.82 AGP driver, Turbo mode enabled
2X AGP and 129MB aperture.
128 MB Ram @ 2-2-2-6-9-8
Win 98SE/ DX- 7

How come none of the records are with ti-500s?

Sphere478 wrote on Yesterday, 14:34:

How come none of the records are with ti-500s?

They are hard to find.

$SOLID$ Necro wrote on Yesterday, 07:10:

5185 3DMARK 2000 324 CPU score Changed the motherboard from a GA 5 AX Rev 4.1, to the P5A-B Rev 1.04. 3.8VIO setting allowed th […]
Show full quote

The attachment 5185 3D2K K63@632 GF 3.jpg is no longer available

The attachment 3D2k CPU 324 points.jpg is no longer available

The attachment K6-3 632mhz CPUZ.jpg is no longer available

The attachment CAS 2-2-2 128 MB ram 3D2k.jpg is no longer available

5185 3DMARK 2000
324 CPU score
Changed the motherboard from a GA 5 AX Rev 4.1, to the P5A-B Rev 1.04.
3.8VIO setting allowed the CPU to run at 5.5x115FSB, I was stuck at 6x105=630mhz on the GA5 since it stuck at 3.5v VIO.
CPU is a K6-3+ 400 ATZ using 2.4v.
PNY GF3 TI200@ 220x460
Nvidia 7.76 Det. GPU driver
ALI 1.82 AGP driver, Turbo mode enabled
2X AGP and 129MB aperture.
128 MB Ram @ 2-2-2-6-9-8
Win 98SE/ DX- 7

6x multiplier slows down memory read/write values.
5.5x is perfect for K6plus

I would love to see an AMD K6 UTbench aiming for stars thread (with sound , at 800x600 medium detail). I was obssesed with it and managed to get 30.1fps with a compaq camaro motherboard , a k6-2+ running at 620Mhz,384Mb CL2 pc133 ram and a voodoo 3 2000.

supercordo wrote on Yesterday, 17:14:

Sphere478 wrote on Yesterday, 14:34:

How come none of the records are with ti-500s?

They are hard to find.

I have two, I haven’t seemed to have been able to accomplish results even close to this thread. I can’t seem to get the drivers working

I think I recall that they liked to also rarely work on most of my setups as well.

I think I have a nvs280 as well if I recall that’s a gf2? Same story, can’t seem to get them going on most of my setups. Seems to either be no display, no dvi, or driver not working well.