Kind of another "not sure which bought thread to land this in" but nothing is getting any newer. Anything with external drive bays is seeming fairly retro now. (Reminder that a later rev 5170 AT would have been the age Ivybridge is now when Vogons kicked off. )

Nothing particularly special here, just boxes for bits. Have full ATX tower from ThermalTake, it's got the bottom PSU to handily save any dropped screws for you, two 120 holes in top, one in side, one in back, two in base, and one behind front panel. The ones on top have extra margin so might take 150 but don't have the mounting holes fully done, so minor mod if wanted. Back one takes 80,90, 120. Ample drive bays. 4 and 7 and one 3.5 can even be external, or two if you wanna lose the FP sockets. Oddly the barcode/PN on the bottom comes up as a LianLi that's all window and rainbow puke, the V100. But I can see the back 3 sides are quite similar, so maybe PN is for that assembly. TT also has a similarish one at microcenter with different front panel as V100, weird. Build quality is thin and cheap, which I don't mind because my back is often gippy and last thing I need is a 40lb case with 20lb more stuff in it. Age seems to be anything between 2007 and 2017 maybe.

Other one is simple ex Dull, seems to be standard mATX good amount of bays for it's size 2 and 1+3 but I think the bottom mount 3.5s get in the way of a longer than 8" GPU. Sleeper build? Yeah, nah, yeah, nah, nah, yeah... not good enough ventilation for too much grunt methinks. Oddly one of the boards I was thinking of, might end up duplicating spec of original optiplex model heh.

Anyway, saw these at a thrift last night... realised I keep prowling classified for cases and never see anything under $30 and got both of these for less when I went back today. Also grabbed a small bag of fans, one 80 and a few clean looking 60s for R&R of old SS7 sinks. That wasn't there last night so maybe they've had a bunch of PC stuff that's bleeding into stock over next few days, so I will have to try back there in passing a few times.

Thinking the TT might get a Haswell build at the moment, or disputing whether to go with my FX-8350 build in it.

Edit: I cheated and "lensed" it, seems to be a ThermalTake V3 Black Edition hailing from early 2010 initial release. https://www.techpowerup.com/review/thermaltake-v3-black/ and holeeeee sheeeet, someone on eBay wants $350 (CDN) for one.

EditII: Unexpected talent unlocked: Randomly discovered that by "oil canning" the top rear fan grille on the TT, I can do the theme from 2001 Space Odyssey.... the bit that goes nerrrrrr nerrrrrrrr BOM-BOM BOM-BOM BOM-BOM ... that would be a good bit for a youtube channel if I had one 🤣

Here are my latest finds. 😀

Creative 3D Blaster PCI (Rendition Vérité V1000)

ELSA Winner II (Savage4 Pro)

Elsa Erazor III (RIVA TNT2 M64)

ELSA Victory Erazor (RIVA 128)

Diamond Viper V330 (box only)

In which country are you finding these things?

MattRocks wrote on Yesterday, 08:59:

In which country are you finding these things?

I also would like to know this!

The Elsa Victory Erazer has a German sticker on, so I'm going to go out on a limb and say Nepal.

*) Besides Nepal, German is also spoken in Austria and Switzerland, terms and conditions apply.

🤣, very funny!

Creative 3D Blaster PCI: USA
ELSA Winner II: Spain
Elsa Erazor III LT: Spain
ELSA Victory Erazor: Germany

Diamond Viper V330: USA

Damn, I was a bit too far South, if I had said Mongolia, it might have been the exact average of all those origins on a Pacific centered map 🤣 🤣 🤣

oldGPU wrote on Yesterday, 07:32:

Here are my latest finds. 😀

Dear god man leave some nice things for the rest of us :p joking man those are some neat boxed cards! I'd imagine you can get quite the display going if you keep it up at this speed!

oldGPU wrote on Yesterday, 15:18:

🤣, very funny!

Creative 3D Blaster PCI: USA

Do you have a picture of the card? I saw a listing earlier this week that was incorrectly labeled as the card was an older Diamond card in the 3D Blaster (CT6240) PCI box. The item was also listed as a 3D Labs Permedia 2 which was obviously incorrect as well, and I sent the owner a message to correct the listing.

G-X wrote on Yesterday, 18:24:

oldGPU wrote on Yesterday, 07:32:

Here are my latest finds. 😀

Dear god man leave some nice things for the rest of us :p joking man those are some neat boxed cards! I'd imagine you can get quite the display going if you keep it up at this speed!

He's a man on a mission, if you got something in your cart you better hit buy now.

Random trinket, was out of town so hit the thrifts on the way, nothing special, one trinket a 38mm deep 80mm Nidec that should do about 71cfm and get airflow outa the back of the dell box up yonder. Potentialities are potentially potentiating.

Artex wrote on Yesterday, 23:07:

Do you have a picture of the card? I saw a listing earlier this week that was incorrectly labeled as the card was an older Diamond card in the 3D Blaster (CT6240) PCI box. The item was also listed as a 3D Labs Permedia 2 which was obviously incorrect as well, and I sent the owner a message to correct the listing.

The matching correct card was located too so I was sent both 😀

G-X wrote on Yesterday, 18:24:

Dear god man leave some nice things for the rest of us :p joking man those are some neat boxed cards! I'd imagine you can get quite the display going if you keep it up at this speed!

:p Thank you! I would love to have a cool display setup like some people here do. Many legends here to live up to.

Fresh arrival, semi-impulse fleabay purchase due to seeing them for ~$10USD (i.e. sometime when I got round to it I was gonna go looking)

SL5VR Celeron 1300, Tualatin core, FPGA2, 100Mhz bus so 13x multi, which is a nice spot to start from if you want some high Tualatin clocks without having to get super insane with FSB. IMO the 256 - 512 cache difference to PIII-S is less significant than coppermine 128-256. Also a nice easy 1.5V Vcore on these, got 2.