VOGONS


What modern activity did you get up to today?

Topic actions

Reply 1800 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Although that card is adequate, thinking about putting a different one in. Forgot I had a bluetooth wifi combo card. Feeling like that would be a good idea given that the only way I can add anything to this box is USB and KB and Mouse need one each, unless I go to a PS/2 Y converter, then one, but that's still 20% of them. So using BT keyboard and mouse would get that back. Think it's an Azurus or something like that. Once upon a time I thought I had an intel combo card, but maybe installed it in something and forgot.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1801 of 1828, by DaveDDS

User metadata
Rank Oldbie
Rank
Oldbie
DaveDDS wrote on 2026-10-14, 17:40:

... going back via a trans-Atlantic ship crossing an about a week - hopefully THAT water won't be too low! ...

On our way now .. see attached

https://dunfield.themindfactory.com ; "Daves Old Computers" ; SW dev addict best known:
ImageDisk: rd/wr ANY floppy PChw can ; Micro-C: compiler for DOS+ManySmallCPU ; DDLINK: simple/small filetransfer(w/o netSW)via Lan/Lpt/Com

Reply 1802 of 1828, by zapbuzz

User metadata
Rank Oldbie
Rank
Oldbie

last 2 days I had tried to go back to windows 10 on my potato PC and failed.
It installed but for the extended security updates I used an alternative Microsoft account on a pc with a digital license already activated on my main Microsoft email address.
It said it was ESU enabled but still showed missing updates message after windows update.
I tried all the fixes nothing changed it was frustrating
It then got nasty.
Images vanished from folder.
Video games became laggy.
Please learn from my mistake if you already activated ESU with an email account do not use an alternative email address if you reinstall windows 10 and do the process again will fail internally and silently.
Maybe someone could verify this because I also thought i was hacked and changed every damn password I had on planet earth.

Reply 1803 of 1828, by dr_st

User metadata
Rank l33t
Rank
l33t

Is Win10 still 'modern' or already 'retro'?

I think it's modern. Anyways, I set up an old Toshiba Portégé Z30-C for my son to use in school.

6th generation Core i5, 13.3" FHD IPS screen, 256GB NVMe SSD, very light weight. I can upgrade RAM from 8GB to 16GB if I need.

Quite impressed with how Win10 just picked up all the drivers. I only had to install one driver for the Alps pointing device (trackpoint/touchpad) to get access to the advanced settings.

The only question is whether the battery life is going to be long enough. We'll find out.

https://cloakedthargoid.wordpress.com/ - Random content on hardware, software, games and toys

Reply 1804 of 1828, by myne

User metadata
Rank l33t
Rank
l33t

Some argue by age.
In which case 6th gen + 10 is "retro"

I argue by any ONE of the following
* BIOS[1]
* ISA/AGP in use [2]
* 16/32bit OS [3]

[1] ie not uefi
[2] Yes, I am aware LPC(ISA 2.0 as it were) which existed up to s1151(v1) and AM4 does technically connect superios but unless it's actively running something else it's kinda moot
[3] I suppose you could count xp64, vista, 7, 8, 8.1 as retro if you really really wanted to but they're functionally degrees away from W11 and there's no particularly compelling reason outside of "it's old and slow" to run them when 10/11 will 99% of the time run fine.

Anything else is just old. I don't think old is retro automatically.
It's like pointing at a 95 Toyota Camry and saying "look it's retro!"
It's just a template car. There's nothing special about it.
No reason to buy or drive it except as transport because it exists at a price in your proximity.

6th gen running w10 would by some definitions be retro.
It's UEFI, PCIE, and running win64.
To me, it is simply old. Nothing wrong with it. It's contemporary enough.
Aside from artificial constraints easily worked around, you can do everything on it you can do on the newest. Albeit slower.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 1805 of 1828, by Dothan Burger

User metadata
Rank Member
Rank
Member

Adding a battery to the Super Station One today and I'm kind of impressed by the build quality. I like how everything is labeled on the PCB.

The attachment IMG_1682.jpg is no longer available

Reply 1806 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Woohoo, the improbable Ryzen system is alive, with motherboard from Amazon sale, rando loose cpu from FB rando, thrift store DDR4 kit AND 2023 pulls from an IT worker ddr4 kit freebie. Also tested a thrifted single 8GB crucial stick and that seemed good too. It's still just on the mobo tray with temp GPU while I screw around with testing RAM and making sure things fitted to case.

It's definitely working fine at 2133 lowest common denominator RAM speed, the highest JEDEC one in the Teamgroup pair, and the default of the Samsung/HP pair of "generics". What I am not sure of is whether settings are sticking or not, tried going up to 2800, because the XMP on the teamgroup is a long ways from X at 2600, default volts, and the Samsung chips appear to be the 4Gbit famed "B" dies that take all the volts and go to 3800 or more. Anyway if the settings stuck they did one pass of memtest86 like that. Wondering if I should find out which OC modules used Samsung and what their XMP is, and copy it.

But anyway, got Ryzen 5 1500X going on 32GB on a B550 mATX board and need to get it fully buttoned up into the case and Ubuntu Trashpanda installed.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1807 of 1828, by darry

User metadata
Rank l33t++
Rank
l33t++
BitWrangler wrote on 2026-11-12, 00:45:

Woohoo, the improbable Ryzen system is alive, with motherboard from Amazon sale, rando loose cpu from FB rando, thrift store DDR4 kit AND 2023 pulls from an IT worker ddr4 kit freebie. Also tested a thrifted single 8GB crucial stick and that seemed good too. It's still just on the mobo tray with temp GPU while I screw around with testing RAM and making sure things fitted to case.

It's definitely working fine at 2133 lowest common denominator RAM speed, the highest JEDEC one in the Teamgroup pair, and the default of the Samsung/HP pair of "generics". What I am not sure of is whether settings are sticking or not, tried going up to 2800, because the XMP on the teamgroup is a long ways from X at 2600, default volts, and the Samsung chips appear to be the 4Gbit famed "B" dies that take all the volts and go to 3800 or more. Anyway if the settings stuck they did one pass of memtest86 like that. Wondering if I should find out which OC modules used Samsung and what their XMP is, and copy it.

But anyway, got Ryzen 5 1500X going on 32GB on a B550 mATX board and need to get it fully buttoned up into the case and Ubuntu Trashpanda installed.

Ryzen 5500 looks like rather sweet 125$ 6c/12t upgrade for that (the 1500X could probably be sold to recoup some $$$). Even a 5900 XT with 16c/12t is like 400$. That being said, if the objective is make it the best bargain bin/yard sale build (fits the origin story of the parts you mention) that you can, don't change a thing.

Reply 1808 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++
darry wrote on 2026-11-12, 01:11:
BitWrangler wrote on 2026-11-12, 00:45:

Woohoo, the improbable Ryzen system is alive, with motherboard from Amazon sale, rando loose cpu from FB rando, thrift store DDR4 kit AND 2023 pulls from an IT worker ddr4 kit freebie. Also tested a thrifted single 8GB crucial stick and that seemed good too. It's still just on the mobo tray with temp GPU while I screw around with testing RAM and making sure things fitted to case.

It's definitely working fine at 2133 lowest common denominator RAM speed, the highest JEDEC one in the Teamgroup pair, and the default of the Samsung/HP pair of "generics". What I am not sure of is whether settings are sticking or not, tried going up to 2800, because the XMP on the teamgroup is a long ways from X at 2600, default volts, and the Samsung chips appear to be the 4Gbit famed "B" dies that take all the volts and go to 3800 or more. Anyway if the settings stuck they did one pass of memtest86 like that. Wondering if I should find out which OC modules used Samsung and what their XMP is, and copy it.

But anyway, got Ryzen 5 1500X going on 32GB on a B550 mATX board and need to get it fully buttoned up into the case and Ubuntu Trashpanda installed.

Ryzen 5500 looks like rather sweet 125$ 6c/12t upgrade for that (the 1500X could probably be sold to recoup some $$$). Even a 5900 XT with 16c/12t is like 400$. That being said, if the objective is make it the best bargain bin/yard sale build (fits the origin story of the parts you mention) that you can, don't change a thing.

Yeah the original intent was to throw that $30 1500x on a $30 first gen board, but there's just none of those around, they all fried or something. Stupid market round here, I could literally see the board I got new off Amazon for $80 in some amazon days sale, get put up on FB marketplace for $130 well used. Then DDR4 price went cray cray, I was already sitting on that free pair of 8GB Samsungs, though if I had looked up about the chips back THEN, I would have asked him for more. He was saying he had a shoebox full he didn't know what to do with at that time. We were joking about he could have set himself up on a Caribbean island if he'd kept them. Though those specific HP/Samsung are supposed to be kicking around on eBay in quantity, around the same pricing as generic generics.

So 16GB was feeling a little tight and I lucked into the Teamgroup T-force Vulkan Z kit at a thrift store, suspiciously marked down to $50 from $79 so I wasn't expecting much. Turns out those are meant to have Micron 8Gbit "E" dies, which clock different than the Samsungs. Samsungs seem to be all about voltage and tight timings and clocks don't go amazing high, the Microns do loose timings and insane clocks and don't like so much voltage. It looks like the lines cross at about 3600 with prolly 16-18-18 timings on 1.35V or 1.4 if needed. However, if I come across a pair of either Micron or Samsung based modules cheap, I might go fully one way or the other, otherwise I'm holding my nose playing EB Games *badum tish*

Holding off on CPU buy unless one comes up real cheap. Missed a bent pin Ryzen9 for $50 in the middle of summer, damn thing had been listed weeks too, just discover it and it's gone in a day. Gonna be throwing AI loads at this thing and I want to see specifically how it struggles and does well. Maybe I'll decide to go nuts on CPU, 5800x3d or something or maybe I'll re-platform to get PCIe 4.0 for better GPU bandwidth. Those Memory Express combo deals looking tasty for current insanity.

Think I'm gonna boot Ubuntu off a shitty small SATA SSD and have a high speed data share partition with Windoze on half a 1TB m.2 drive. Got one earlier last year for what now seems the impossible price of $90. I was thinking about pairing two 250GB SATA SSDs in RAID 0, but since that would struggle to make a TB/sec and the m.2 should do 3Tb/sec on this interface (actually capable of near 4, but on PCIe 4.0 derived slot) there didn't seem to be much point. Guess the balls out haswell board gets those since it can't m.2.

GPU going in hopefully is a R9 295x2, it's a bit of a squeeze. Found a brute PSU, it says it's headline output is 750W but it can put 744W to single rail 12V so that should feed it okay. Corsair TX750M.

Edit: I should kind of admit I bought the wrong chip, I wanted one of the first tranche of Ryzen CPUs "for posterity" kinda because they were cool and significant, but I didn't realise the 1500x came out a month or so after the first, first Ryzens, so I messed that up a tad. If I'm gonna try again to get it right I might get a 1st gen 7.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1809 of 1828, by darry

User metadata
Rank l33t++
Rank
l33t++
BitWrangler wrote on 2026-11-12, 03:57:
Yeah the original intent was to throw that $30 1500x on a $30 first gen board, but there's just none of those around, they all f […]
Show full quote
darry wrote on 2026-11-12, 01:11:
BitWrangler wrote on 2026-11-12, 00:45:

Woohoo, the improbable Ryzen system is alive, with motherboard from Amazon sale, rando loose cpu from FB rando, thrift store DDR4 kit AND 2023 pulls from an IT worker ddr4 kit freebie. Also tested a thrifted single 8GB crucial stick and that seemed good too. It's still just on the mobo tray with temp GPU while I screw around with testing RAM and making sure things fitted to case.

It's definitely working fine at 2133 lowest common denominator RAM speed, the highest JEDEC one in the Teamgroup pair, and the default of the Samsung/HP pair of "generics". What I am not sure of is whether settings are sticking or not, tried going up to 2800, because the XMP on the teamgroup is a long ways from X at 2600, default volts, and the Samsung chips appear to be the 4Gbit famed "B" dies that take all the volts and go to 3800 or more. Anyway if the settings stuck they did one pass of memtest86 like that. Wondering if I should find out which OC modules used Samsung and what their XMP is, and copy it.

But anyway, got Ryzen 5 1500X going on 32GB on a B550 mATX board and need to get it fully buttoned up into the case and Ubuntu Trashpanda installed.

Ryzen 5500 looks like rather sweet 125$ 6c/12t upgrade for that (the 1500X could probably be sold to recoup some $$$). Even a 5900 XT with 16c/12t is like 400$. That being said, if the objective is make it the best bargain bin/yard sale build (fits the origin story of the parts you mention) that you can, don't change a thing.

Yeah the original intent was to throw that $30 1500x on a $30 first gen board, but there's just none of those around, they all fried or something. Stupid market round here, I could literally see the board I got new off Amazon for $80 in some amazon days sale, get put up on FB marketplace for $130 well used. Then DDR4 price went cray cray, I was already sitting on that free pair of 8GB Samsungs, though if I had looked up about the chips back THEN, I would have asked him for more. He was saying he had a shoebox full he didn't know what to do with at that time. We were joking about he could have set himself up on a Caribbean island if he'd kept them. Though those specific HP/Samsung are supposed to be kicking around on eBay in quantity, around the same pricing as generic generics.

So 16GB was feeling a little tight and I lucked into the Teamgroup T-force Vulkan Z kit at a thrift store, suspiciously marked down to $50 from $79 so I wasn't expecting much. Turns out those are meant to have Micron 8Gbit "E" dies, which clock different than the Samsungs. Samsungs seem to be all about voltage and tight timings and clocks don't go amazing high, the Microns do loose timings and insane clocks and don't like so much voltage. It looks like the lines cross at about 3600 with prolly 16-18-18 timings on 1.35V or 1.4 if needed. However, if I come across a pair of either Micron or Samsung based modules cheap, I might go fully one way or the other, otherwise I'm holding my nose playing EB Games *badum tish*

Holding off on CPU buy unless one comes up real cheap. Missed a bent pin Ryzen9 for $50 in the middle of summer, damn thing had been listed weeks too, just discover it and it's gone in a day. Gonna be throwing AI loads at this thing and I want to see specifically how it struggles and does well. Maybe I'll decide to go nuts on CPU, 5800x3d or something or maybe I'll re-platform to get PCIe 4.0 for better GPU bandwidth. Those Memory Express combo deals looking tasty for current insanity.

Think I'm gonna boot Ubuntu off a shitty small SATA SSD and have a high speed data share partition with Windoze on half a 1TB m.2 drive. Got one earlier last year for what now seems the impossible price of $90. I was thinking about pairing two 250GB SATA SSDs in RAID 0, but since that would struggle to make a TB/sec and the m.2 should do 3Tb/sec on this interface (actually capable of near 4, but on PCIe 4.0 derived slot) there didn't seem to be much point. Guess the balls out haswell board gets those since it can't m.2.

GPU going in hopefully is a R9 295x2, it's a bit of a squeeze. Found a brute PSU, it says it's headline output is 750W but it can put 744W to single rail 12V so that should feed it okay. Corsair TX750M.

That R9 295x2 can draw up to 500W or so, so I hope that TX750M is close to peak health.

I'm replacing an i9 9900k + z390 MB with a Ryzen 9 5900 XT + Ebay sourced el cheapo Gigabyte Gaming X AM4 Motherboard (x570). I've got 4x16GB of Corsair DDR4 2666 RAM for it (2 are Micron, 2 are Hynix, AFAICR). As long as it runs at 2666, I'm not going to complain.

To complement that, I just got 2 Realtek RTL8157 based USB 5Gb NICs (30$ each) to link that and another PC in a point-to-point link for homelab use purposes. Not sure what I'll use for storage, but I do have a few NVME and SATA SSD drives that I had acquired (hoarded) in the before times, when storage was still cheap, to choose from.

On a side note, while Realtek based ethernet hardware might not be the fastest, most efficient or most reliable (that last point is debatable), it is unbelievably cheap and usually good enough after a few hardware revs and once the drivers have stabilized. They've come a long way since the rather abysmal RTL8129 (which still worked, albeit hobbled and with kludges)

Reply 1810 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Realtek is like Little Caesars, it's cheap and it's ready. Meaning you can pick one up about anywhere and don't have to hunt drivers too hard no matter what you want to run it on. Unlike if you buy some super speed fancy intel chip on a theoretically standard interface card thinking you're getting a deal and it works in one HP server period.

I gotta look into my NIC sitch not sure if I want to try having a 2.5Gbit segment. Maybe I've got enough hardware and fast machines coming up to justify, maybe not. Might just strugglebus the 1Gbit until 10Gbit stuff accumulates.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1811 of 1828, by Nexxen

User metadata
Rank l33t
Rank
l33t
BitWrangler wrote on 2026-11-12, 05:00:

Realtek is like Little Caesars, it's cheap and it's ready. Meaning you can pick one up about anywhere and don't have to hunt drivers too hard no matter what you want to run it on. Unlike if you buy some super speed fancy intel chip on a theoretically standard interface card thinking you're getting a deal and it works in one HP server period.

I gotta look into my NIC sitch not sure if I want to try having a 2.5Gbit segment. Maybe I've got enough hardware and fast machines coming up to justify, maybe not. Might just strugglebus the 1Gbit until 10Gbit stuff accumulates.

I recently bought a 2.5 switch.
For internet? 1Gbit is already enough, 2.5 gets it even better but I need to download to a Nvme to appreciate the speed. I have a 2.5 speed from my ISP, I decided to use it as it is there.
I have a PCIe card for it and one board that sports it. All other stuff has a USB dongle that I rotate if needed (rarely).

Local network? Old machine won't need past 1Gbit, 2.5 I need hardware capable of it. And I don't.

If you are wondering, unless you need the speed for work or specific uses, or upload speed for streaming, it isn't really worth it.
That's my 0.02.

PC#1 Pentium 233 MMX - 98SE
PC#2 PIII-1Ghz - 98SE/W2K

- "One hates the specialty unobtainium parts, the other laughs in greed listing them under a ridiculous price" - kotel studios
- Bare metal ist krieg.

Reply 1812 of 1828, by darry

User metadata
Rank l33t++
Rank
l33t++

Besides work or work-related stuff, faster than 1Gb networking is mostly pointless for the average joe, I absolutely agree.

It can be relevant or useful for people with
- faster than 1Gb Internet
- backups ( the spinning rust I currently run can mostly saturate a 2.5Gb link)
- a need for fast non local (LAN) storage for use cases like uncompressed or lossless video capture or recording

For my needs, one segment with 2.5Gb is plenty for now (most of my stuff is still 1Gb). I can always resort to link aggregation if I need more than 2.5Gb or 1Gb in whatever situation.

I have a specific use case that can benefit from a fast point-to-point connection over 3 feet. Getting 5Gb NICs for it, rather than 2.5Gb ones, increased the cost by about 10$. Other than that, the only (first) scenario that will eventually benefit from >2.5Gb or even >5Gb on my end is likely my NAS. When that becomes the case, switching it to 10Gb (my cheap switch has an SFP port) and clients nodes to 2.5Gb or 5Gb should suffice for a while.

It took me about 20 years to find >1Gb useful at home. Unless >5Gb Internet actually becomes available and useful sometime soon and/or local storage becomes both much faster and useful to me (and cheaper), I might not live to see a real need for 10Gb at home.

Reply 1813 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Indeed, 100Mbit is actually plenty fast enough for sharing my internet connection, and by the time it's divvied up a couple of ways I might as well have 10Mbit and I wouldn't notice. Also yes, the storage I have online will mostly saturate it's bandwidth at only a large chunk of the 1 Gbit. However, I am heading into waters where compute clustering comes into play and two or three machines will want to yeet chunks of data RAM to RAM back and forth at each other. Though if you were building this kind of setup from scratch at the day job, 10Gbit switch would go right into the rack along with $80,000 of the rest of the top end hardware. I'm just stitching shit together that's past it's prime.

I did just see an article where similar workload was down only 10% on 1Gbit vs 2.5Gbit, but if that 10% is do-able with what bits of 2.5Gbit are here already, then I may as well. Though I might be needing PCIe interfaces for other things.

I actually misinterpreted my board specs https://www.gigabyte.com/ca/Motherboard/B550M-K-rev-10 it is PCIe 4.0 capable on the board, but the current CPU isn't. So the 20 lanes available from CPU get sent to 16x slot and 4x nvme primary. Then chipset onboard supplies PCIe 3.0 to secondary nvme 2x and I am going to assume the 1x slot. There's 1Gbit onboard, but theoretical possibility of putting a NIC in the secondary m.2 nvme if I need the 1x slot.

I could play with some kind of lashup like this https://www.adt.link/m2m.html but would be more interested in a m.2 nvme 2 lane breakout to two independent 1x slots. Though breakout to single 4x slot might offer interesting options too...

Edit: guys, guys, I got teh perfect GPU compute setup... Android Phone > OTG USB adapter > 8 port hub > USB to SATA > m.2 nvme dual SATA adapter > m2.nvme to PCIe 4x slot riser = 16 RTX5090s on tap 🤣 🤣 🤣

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1814 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Bit of a busy day, didn't really get much done, pulled out my secret (ooops) stash of PSU wires... and damn 80% of them are that 9 pin 3x3 connector at the PSU end, what brand takes those? Guess it helps to know I just pick up bags of PSU wires when I see them cheap... just surprised I ended up with so many of that type when they don't seem to fit any of a fairly wide group of randoms I have.

Also hiding in amongst them, didn't remember having, maybe was a wood for the trees thing, were some 6 pin PCIe power y split to two 8 pin PCIe power <sarcasm> I bet those work super well </sarcasm>

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1815 of 1828, by Ozzuneoj

User metadata
Rank l33t
Rank
l33t
BitWrangler wrote on 2026-11-13, 05:18:

Bit of a busy day, didn't really get much done, pulled out my secret (ooops) stash of PSU wires... and damn 80% of them are that 9 pin 3x3 connector at the PSU end, what brand takes those? Guess it helps to know I just pick up bags of PSU wires when I see them cheap... just surprised I ended up with so many of that type when they don't seem to fit any of a fairly wide group of randoms I have.

Also hiding in amongst them, didn't remember having, maybe was a wood for the trees thing, were some 6 pin PCIe power y split to two 8 pin PCIe power <sarcasm> I bet those work super well </sarcasm>

Be careful with modular PSU cables. Without knowing the exact model (and possibly revision) of PSU they came from they are a hazard. There are no standards for that end of the cable, and yet there are only so many variations of connectors so they often use the same connector... and even among the same brand name one set of cables could fit and work properly in one model but could fit and catch fire or destroy components in another.

I guess you could technically use a DMM to try to match the pinout to a known set of cables... But that limits their use cases quite a bit, and you'd have to do every single one. If just one looks the same but is wired differently and blows something up it would be real sad.

Anyway, you probably already know this. Just wanted to say... Be careful with those!

Now for some blitting from the back buffer.

Reply 1816 of 1828, by darry

User metadata
Rank l33t++
Rank
l33t++
Ozzuneoj wrote on 2026-11-13, 08:34:
Be careful with modular PSU cables. Without knowing the exact model (and possibly revision) of PSU they came from they are a haz […]
Show full quote
BitWrangler wrote on 2026-11-13, 05:18:

Bit of a busy day, didn't really get much done, pulled out my secret (ooops) stash of PSU wires... and damn 80% of them are that 9 pin 3x3 connector at the PSU end, what brand takes those? Guess it helps to know I just pick up bags of PSU wires when I see them cheap... just surprised I ended up with so many of that type when they don't seem to fit any of a fairly wide group of randoms I have.

Also hiding in amongst them, didn't remember having, maybe was a wood for the trees thing, were some 6 pin PCIe power y split to two 8 pin PCIe power <sarcasm> I bet those work super well </sarcasm>

Be careful with modular PSU cables. Without knowing the exact model (and possibly revision) of PSU they came from they are a hazard. There are no standards for that end of the cable, and yet there are only so many variations of connectors so they often use the same connector... and even among the same brand name one set of cables could fit and work properly in one model but could fit and catch fire or destroy components in another.

I guess you could technically use a DMM to try to match the pinout to a known set of cables... But that limits their use cases quite a bit, and you'd have to do every single one. If just one looks the same but is wired differently and blows something up it would be real sad.

Anyway, you probably already know this. Just wanted to say... Be careful with those!

I second that. On a similar note PCIE to PCI adapters and PCIE switches that are in two parts, connected with a USB A to A cable, all have a similar looking part that goes into the PCIE slot in the PC. Those parts that go into PCIE slot are not necessarily interchangeable and those non standard USB A to A cables might not all be wired the same either (though I suspect those are). I know because magic smoke came out when I innocently did a swaparoo.

Reply 1817 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Yeah I meant to put in the "I know what I'm doing with random cables and can repin a molex" disclaimer.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1818 of 1828, by ODwilly

User metadata
Rank l33t
Rank
l33t
BitWrangler wrote on 2026-11-13, 05:18:

Bit of a busy day, didn't really get much done, pulled out my secret (ooops) stash of PSU wires... and damn 80% of them are that 9 pin 3x3 connector at the PSU end, what brand takes those? Guess it helps to know I just pick up bags of PSU wires when I see them cheap... just surprised I ended up with so many of that type when they don't seem to fit any of a fairly wide group of randoms I have.

Also hiding in amongst them, didn't remember having, maybe was a wood for the trees thing, were some 6 pin PCIe power y split to two 8 pin PCIe power <sarcasm> I bet those work super well </sarcasm>

Hey I was using a single 6pin to 8pin with a 4gb RX480 on a Dell XPS 760x H2C. Because honestly there's no reason for an 8pin on this GPU unless you are overclocking. It has a reference 8gb with just 6pin power connector now, so that adapter has been retired.

Main pc: Asus ROG 17. R9 5900HX, RTX 3070m, 16gb ddr4 3200, 1tb NVME.
Retro PC: Soyo P4S Dragon, 3gb ddr 266, 120gb Maxtor, Geforce Fx 5950 Ultra, SB Live! 5.1

Reply 1819 of 1828, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Yeah the early spate of 8 pin cards there didn't seem a lot of point to, especially when PSUs just had 6 real wires going to them. But one 6 feeding 2 8s seems a bit optimistic. I've only used the 6 splitters where a card wasn't really maxing the power spec. IDK why some cards had two for instance, think it was to ensure they ran on PCIe 1.0 with lower slot power spec.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.