VOGONS


Pascal GPU support in WinXP

Topic actions

Reply 140 of 169, by RayeR

User metadata
Rank Oldbie
Rank
Oldbie

I have found the culptit that caused BSOD on my system, a bit silly...

Even I checked "clean instal" the installer failed to overwrite this currently intalled files (locked by system):
13.09.2015 23:41 3495808 NV4_DISP.DLL
14.09.2015 00:41 3024384 NVAPI.DLL
14.09.2015 00:08 1049904 nvdispco3235598.dll
14.09.2015 00:18 912688 nvdispgenco3235598.dll
13.09.2015 23:41 73728 OpenCL.dll

And mixing old NV4_DISP.DLL with new NV4_MINI.SYS caused some IOCTL call memory corruption. (this is why reverting old NV4_MINI.SYS fixed this). I found it by trying to install some older WinXP backup made when I had GTX 670 - in that case all driver files was replaced by installer correctly and driver worked after reboot. By comparing files I found that my current version had few older driver files so I updated them manually (offline) and now it works fine. Next step I'll try on Dell 4k monitor at work...

Gigabyte GA-P67-DS3-B3, Core i7-2600K @4,5GHz, 8GB DDR3, 128GB SSD, GTX970(GF7900GT), SB Audigy + YMF724F + DreamBlaster combo + LPC2ISA

Reply 141 of 169, by myne

User metadata
Rank l33t
Rank
l33t

You know the drill.
Safe mode, DDU.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 142 of 169, by RayeR

User metadata
Rank Oldbie
Rank
Oldbie

I have multiboot so no problem to manipulate XP files offline but it just didn't come to my mind that not all files was copied and didn't checked them. Blindly hoping that clean install do what one would expect will do 😀

Gigabyte GA-P67-DS3-B3, Core i7-2600K @4,5GHz, 8GB DDR3, 128GB SSD, GTX970(GF7900GT), SB Audigy + YMF724F + DreamBlaster combo + LPC2ISA

Reply 143 of 169, by RayeR

User metadata
Rank Oldbie
Rank
Oldbie

I tried the driver with my GTX 970 on Dell P2721Q via DP 1.2. nVidia drivers automatically offered 2 natuve 4k modes 3840*2160@50 and 60Hz. When I tried to define a custom resolution based o this any frequency change was rejected when clicked test, regardless timing mode. I tried various values in 50-70Hz range. But it's not necessary as this LCD can't go over 60Hz anyawy. Compared to official drivers that offered only 30Hz via DP (HBR1) it's good result. Thank you.

Gigabyte GA-P67-DS3-B3, Core i7-2600K @4,5GHz, 8GB DDR3, 128GB SSD, GTX970(GF7900GT), SB Audigy + YMF724F + DreamBlaster combo + LPC2ISA

Reply 144 of 169, by Shagittarius

User metadata
Rank Oldbie
Rank
Oldbie

I have some benchmarks for you but I don't think there's really a good one. With XP, you've got to go with 3DMark'06, and its limited to a single core. So it's kinda like the old 3dMark2001SE test, its really just a test of a single thread of your CPU. Anyways here are some comparisons:

The attachment 1080ti_bench.jpg is no longer available

The 4990k was running on Windows 10 64bit but I just threw it in to demonstrate how limited this bench really is.

Reply 145 of 169, by myne

User metadata
Rank l33t
Rank
l33t

At some point you just have to declare Good enough.
Which it is.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 146 of 169, by Dimos

User metadata
Rank Newbie
Rank
Newbie
Shagittarius wrote on 2026-11-13, 05:24:

I have some benchmarks for you but I don't think there's really a good one. With XP, you've got to go with 3DMark'06, and its limited to a single core. So it's kinda like the old 3dMark2001SE test, its really just a test of a single thread of your CPU. Anyways here are some comparisons:

The attachment 1080ti_bench.jpg is no longer available

The 4990k was running on Windows 10 64bit but I just threw it in to demonstrate how limited this bench really is.

Well that seems kind of strange actually. 3d Mark 06 is one of the benchmark tools that i use on Xp also and even between the same gpu but with different core and mem frequencies i get (statistically significant) different results. I think you ought to have a significantly better result going from 780 ti to 1080 ti. Aside from the cpu test, which of course regardless the cpu you have won't produce more than a couple of fps during its run, the sm2.0 graphics test and the Hdr/Sm3.0 test should produce pretty different results between a 780 ti and a 1080 ti. Strange result indeed...

Another tool that i use and it probably is a much better option is the latest Xp compatible from Unigine, the Unigine Tropics. If you could at some point try this, it would be much appreciated.

Cpu: Intel i7 4790k
Gpu: Gigabyte Xtreme Gaming 980 ti
Ram: G-Skill Trident X F3-2400C10Q-16GTD
Mobo: Gigabyte Z97x Gaming 5
Hdd: T-Force Vulcan Z 512 gb Ssd
Psu: Corsair CX650
Soundcard: Creative SB Audigy RX
Os: Windows XP Sp3 x86

Reply 147 of 169, by agent_x007

User metadata
Rank Oldbie
Rank
Oldbie

Tropics ?
Unigine Heaven 3.0 works fine.
file.php?mode=view&id=252739
Unigine Heaven 4.0 requires older 2013 installer to work.
Another option is using simple benchmark tool for late XP games (Far Cry/UT2007/Crysis).

3DMark 06 is multithreaded, however CPU test is limited in how much it can scale (I think it's either 8 or 16 threads/cores).
GPU score won't scale with more CPU cores/threads (above certain point), however, overall score for 3DM06 is calculated WITH CPU Score (opposite to previous 3DMarks, where CPU score wasn't taken into account when calculating overall result).

Reply 148 of 169, by Dimos

User metadata
Rank Newbie
Rank
Newbie
agent_x007 wrote on 2026-11-14, 15:57:
Tropics ? Unigine Heaven 3.0 works fine. https://www.vogons.org/download/file.php?mode=view&id=252739 Unigine Heaven 4.0 require […]
Show full quote

Tropics ?
Unigine Heaven 3.0 works fine.
file.php?mode=view&id=252739
Unigine Heaven 4.0 requires older 2013 installer to work.
Another option is using simple benchmark tool for late XP games (Far Cry/UT2007/Crysis).

3DMark 06 is multithreaded, however CPU test is limited in how much it can scale (I think it's either 8 or 16 threads/cores).
GPU score won't scale with more CPU cores/threads (above certain point), however, overall score for 3DM06 is calculated WITH CPU Score (opposite to previous 3DMarks, where CPU score wasn't taken into account when calculating overall result).

That's good to know, i have been using Tropics all this time, cause i had the impression that Heaven wasn't supported in Xp.

I know that about 3dm06, that's why i wrote above that the two results (between 780 ti and 1080 ti) seemed very strange. Normally there should be a pretty much better score with the 1080 ti. That's why i asked if someone could post some benchmarks with pascal cards with the modded drivers versus previous generation cards, to see the performance of pascal gpus with the modded drivers in Xp. Cause there is one thing to have 3d acceleration and another the performance level, the proper boost clocks functionality, full vram availability etc.

Cpu: Intel i7 4790k
Gpu: Gigabyte Xtreme Gaming 980 ti
Ram: G-Skill Trident X F3-2400C10Q-16GTD
Mobo: Gigabyte Z97x Gaming 5
Hdd: T-Force Vulcan Z 512 gb Ssd
Psu: Corsair CX650
Soundcard: Creative SB Audigy RX
Os: Windows XP Sp3 x86

Reply 149 of 169, by Shagittarius

User metadata
Rank Oldbie
Rank
Oldbie

Here is the Heaven 3.0 bench. I don't have the 780ti to compare it to right now.

The attachment x5690_1080ti.JPG is no longer available

Reply 150 of 169, by SupraGSX

User metadata
Rank Newbie
Rank
Newbie
The attachment xp-heaven-no-monitor-result.jpg is no longer available

I don't think these benchmarks mean much, but since so many people asked, here are the results.

1080ti

Windows XP vs. Windows 7 Benchmark Comparison

XP: November 9 build
Windows 7: Driver 391.35

Heaven 4.0 (D3D9, High, 1080p)
XP: 233.7 FPS | Win7: 238.9 FPS

3DMark06 (1024×768)
XP: 39,349 | Win7: 51,551

SM2.0 Score
XP: 18,817 | Win7: 26,159

HDR/SM3.0 Score
XP: 19,984 | Win7: 35,214

CPU Score
XP: 7,606 | Win7: 7,213

Reply 151 of 169, by Shagittarius

User metadata
Rank Oldbie
Rank
Oldbie
SupraGSX wrote on 2026-11-14, 21:02:
I don't think these benchmarks mean much, but since so many people asked, here are the results. […]
Show full quote
The attachment xp-heaven-no-monitor-result.jpg is no longer available

I don't think these benchmarks mean much, but since so many people asked, here are the results.

1080ti

Windows XP vs. Windows 7 Benchmark Comparison

XP: November 9 build
Windows 7: Driver 391.35

Heaven 4.0 (D3D9, High, 1080p)
XP: 233.7 FPS | Win7: 238.9 FPS

3DMark06 (1024×768)
XP: 39,349 | Win7: 51,551

SM2.0 Score
XP: 18,817 | Win7: 26,159

HDR/SM3.0 Score
XP: 19,984 | Win7: 35,214

CPU Score
XP: 7,606 | Win7: 7,213

Your bench only shows 4 gigs of ram on your 1080ti. I also ran heaven 3.0, how did you get 4.0 to run on 32bit XP?

Reply 152 of 169, by SupraGSX

User metadata
Rank Newbie
Rank
Newbie
Shagittarius wrote on 2026-11-14, 21:19:
SupraGSX wrote on 2026-11-14, 21:02:
I don't think these benchmarks mean much, but since so many people asked, here are the results. […]
Show full quote
The attachment xp-heaven-no-monitor-result.jpg is no longer available

I don't think these benchmarks mean much, but since so many people asked, here are the results.

1080ti

Windows XP vs. Windows 7 Benchmark Comparison

XP: November 9 build
Windows 7: Driver 391.35

Heaven 4.0 (D3D9, High, 1080p)
XP: 233.7 FPS | Win7: 238.9 FPS

3DMark06 (1024×768)
XP: 39,349 | Win7: 51,551

SM2.0 Score
XP: 18,817 | Win7: 26,159

HDR/SM3.0 Score
XP: 19,984 | Win7: 35,214

CPU Score
XP: 7,606 | Win7: 7,213

Your bench only shows 4 gigs of ram on your 1080ti. I also ran heaven 3.0, how did you get 4.0 to run on 32bit XP?

4.0 is supported natively

Benchmarks done in qemu with Linux as host. This isolates as much overhead as possible. Host PC is am5.

Reply 153 of 169, by Dimos

User metadata
Rank Newbie
Rank
Newbie
SupraGSX wrote on 2026-11-14, 21:02:
I don't think these benchmarks mean much, but since so many people asked, here are the results. […]
Show full quote
The attachment xp-heaven-no-monitor-result.jpg is no longer available

I don't think these benchmarks mean much, but since so many people asked, here are the results.

1080ti

Windows XP vs. Windows 7 Benchmark Comparison

XP: November 9 build
Windows 7: Driver 391.35

Heaven 4.0 (D3D9, High, 1080p)
XP: 233.7 FPS | Win7: 238.9 FPS

3DMark06 (1024×768)
XP: 39,349 | Win7: 51,551

SM2.0 Score
XP: 18,817 | Win7: 26,159

HDR/SM3.0 Score
XP: 19,984 | Win7: 35,214

CPU Score
XP: 7,606 | Win7: 7,213

Thank you so much. Of course a benchmark like this does not mean anything definitive about pascal's performance, it is just an indication. Besides comparing (the newly acquired thanks to your work) winXp performance vs on later Windows' native drivers (which of course couldn't be the same for various reasons), most interesting would be comparing for example a Kepler one with the original drivers on Xp like the 780 ti vs a pascal one like 1080 ti with your modded driver and see if the difference is around the level expected. To put it simply, the real question is if a pascal card works performance wise as expected with the drivers on Xp. As it seems you have a 1080 ti and if i remember correctly it was one of the first gpus you verified it worked with your drivers it would be very much appreciated if you could tell us your experience with it, performance, boost clocks, vram availability, power states etc.

Cpu: Intel i7 4790k
Gpu: Gigabyte Xtreme Gaming 980 ti
Ram: G-Skill Trident X F3-2400C10Q-16GTD
Mobo: Gigabyte Z97x Gaming 5
Hdd: T-Force Vulcan Z 512 gb Ssd
Psu: Corsair CX650
Soundcard: Creative SB Audigy RX
Os: Windows XP Sp3 x86

Reply 154 of 169, by SupraGSX

User metadata
Rank Newbie
Rank
Newbie

It boosts up to 1569mhz
All power states P0 to P8 work
Has 11gb of vram (heaven reports the 4gb in all 32 bit os not just xp)
Has great performance in games exactly like you would expect a 1080ti to. Also afterburner works as well so overclocking works as well as it ever did in XP (no voltage control like all other cards in xp). I actually patched that recently for gp107/8 maybe I'll include that ability in more cards later.

I've never benched other cards so I don't know how they compare. I spend so much time using my PC for R&D trying to make the driver better. I won't have time (or desire) to do much more of it so I'll leave that to those that care.

Stability wise it's been completely crash free since fixing a vbe worker bug many builds ago. The only reason there's more 382.69 builds now is for gp107 and 108 which are very different and have taken alot to get working well. Gp102, 104, and 106 all have basically had same build since very early on.

Reply 155 of 169, by Dimos

User metadata
Rank Newbie
Rank
Newbie

Appreciated! Keep up the good work.

Cpu: Intel i7 4790k
Gpu: Gigabyte Xtreme Gaming 980 ti
Ram: G-Skill Trident X F3-2400C10Q-16GTD
Mobo: Gigabyte Z97x Gaming 5
Hdd: T-Force Vulcan Z 512 gb Ssd
Psu: Corsair CX650
Soundcard: Creative SB Audigy RX
Os: Windows XP Sp3 x86

Reply 156 of 169, by Shagittarius

User metadata
Rank Oldbie
Rank
Oldbie

On the other hand my cpu should be running circles around his core2 even with his overclock, so why do I get the same performance as a 780? Also the 3.0 benchmark reports the full 12gb of ram on xp 32bit. I shall have to try to get 4.0 installed I suppose, how does one go about that?

Reply 157 of 169, by Dimos

User metadata
Rank Newbie
Rank
Newbie

It is mentioned a few posts above that Heaven 4.0 needs an installer from 2013 to run on Xp. Also in supragsx' s case the 3dm06 benchmark produces again some perplexing results. The win 7 score is much higher than the Xp one, although the cpu score is higher on Xp. This again seems pretty strange. Another thing i noticed is the mention of the 1569 mhz boost clock. I really hope that this in fact is the base clock, not the boost one, cause every 1080 ti boosts at least up to the mid 1800s - low 1900s.

Cpu: Intel i7 4790k
Gpu: Gigabyte Xtreme Gaming 980 ti
Ram: G-Skill Trident X F3-2400C10Q-16GTD
Mobo: Gigabyte Z97x Gaming 5
Hdd: T-Force Vulcan Z 512 gb Ssd
Psu: Corsair CX650
Soundcard: Creative SB Audigy RX
Os: Windows XP Sp3 x86

Reply 158 of 169, by SupraGSX

User metadata
Rank Newbie
Rank
Newbie
Shagittarius wrote on 2026-11-15, 07:22:

On the other hand my cpu should be running circles around his core2 even with his overclock, so why do I get the same performance as a 780? Also the 3.0 benchmark reports the full 12gb of ram on xp 32bit. I shall have to try to get 4.0 installed I suppose, how does one go about that?

As I already said above, its ran in qemu the core 2 duo is emulated. It's actually an am5 9950x3d. Also it's a multi GPU system so 1080ti isn't even in primary slot. I did both benches in qemu to isolate every variable but os. Do the numbers mean anything by themselves as a score nope. Can you compare the two scores to one another yep. Did we learn anything? Probably not. Heaven is basically identical, 3dmark06 is 20 percent slower. Depending on which you believe it's either at parity or 20 percent slower. Regardless it's orders of magnitude faster than a 780ti if that's your original concern 😂

Again 4.0 is native extract and install no magic to it.

Reply 159 of 169, by SupraGSX

User metadata
Rank Newbie
Rank
Newbie
Dimos wrote on 2026-11-15, 07:56:

It is mentioned a few posts above that Heaven 4.0 needs an installer from 2013 to run on Xp. Also in supragsx' s case the 3dm06 benchmark produces again some perplexing results. The win 7 score is much higher than the Xp one, although the cpu score is higher on Xp. This again seems pretty strange. Another thing i noticed is the mention of the 1569 mhz boost clock. I really hope that this in fact is the base clock, not the boost one, cause every 1080 ti boosts at least up to the mid 1800s - low 1900s.

No they don't I don't know where you're getting that information? Base clock of 1080ti is 1480mhz. Boost is about 100mhz higher on most cards. I can boost my evga ftw3 card up to about 1950mhz but founders cards are no where near that.