VOGONS


What modern activity did you get up to today?

Topic actions

Reply 1820 of 1838, by ODwilly

User metadata
Rank l33t
Rank
l33t
BitWrangler wrote on 2026-11-14, 05:29:

Yeah the early spate of 8 pin cards there didn't seem a lot of point to, especially when PSUs just had 6 real wires going to them. But one 6 feeding 2 8s seems a bit optimistic. I've only used the 6 splitters where a card wasn't really maxing the power spec. IDK why some cards had two for instance, think it was to ensure they ran on PCIe 1.0 with lower slot power spec.

The funny thing is that the PSU is 1000watts, but has 4 6pin pcie connectors. I found the 6 to 8pin adapter at a local computer shop for $5 and a dual 6 to 8pin would have been way less sketchy but I didnt want to spend $20 for one online after shipping

Main pc: Asus ROG 17. R9 5900HX, RTX 3070m, 16gb ddr4 3200, 1tb NVME.
Retro PC: Soyo P4S Dragon, 3gb ddr 266, 120gb Maxtor, Geforce Fx 5950 Ultra, SB Live! 5.1

Reply 1821 of 1838, by ODwilly

User metadata
Rank l33t
Rank
l33t

Took apart my Asus 17 inch gaming laptop to disconnect the keyboard, since its worse than nonfunctional. The charger is dead, and the battery decided to become a spicy pillow.
Going to buy a universal charger, leave the battery out, keyboard disconnected and use it as a desktop.
Ryzen 5900hx, 24gb of ddr4 3200mhz (1 original 16gb 3600mhz stick + a random 8gb stick of 3200mhz) and the full TDP 3070 mobile, so still holds up great performance wise.

Main pc: Asus ROG 17. R9 5900HX, RTX 3070m, 16gb ddr4 3200, 1tb NVME.
Retro PC: Soyo P4S Dragon, 3gb ddr 266, 120gb Maxtor, Geforce Fx 5950 Ultra, SB Live! 5.1

Reply 1822 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Hmmm, first attempts with R9 295X2 frustrating, the fit is "only just" and trying to ram the 8pins home of course levers up the front of the card, so then you wonder if it's seated right. Powering up the machine I get lights and fans on it, no display yet... but I think the machine is past POST and trying to boot. However the DVI-D on this monitor, must be version 0.1 Alpha has been troublesome in the past, in fact the only GPU I got working well on it was a GT440, I have had to resort to VGA input on several GPU. Buuuut, haven't discovered a way of getting VGA out of DVI-D or mini display ports yet. (Might have an adaptor somewhere that helps, can't think where to look) Tomorrow I guess I am swapping monitors around... damn thing is the only one that fits that cubby on that desk though.

(This configuration previously running with a lightweight GPU, so it's not RAM, CPU, blah blah)

Edit: though I just had a thought that the built in 8 pin PCIe power on this PSU are "fake" 8 pin with the looped ground wire on 2. Maybe this GPU don't like that, and I should look see if I've got fully wired 8 pin to plug into the modular part. Though come to think again, there's only 5 pins at the PSU plug end, so how much difference can it make???

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1823 of 1838, by ElectroSoldier

User metadata
Rank Oldbie
Rank
Oldbie

Spent a while looking for a free STL to print out a 10" (actually 9.5") rack mount for a DELL WYSE 5070 Extended.
Called no joy so far though 🙁

Reply 1824 of 1838, by ElectroSoldier

User metadata
Rank Oldbie
Rank
Oldbie

Spent 20 minutes upgrading one of my HP Elite Slice G2 PCs.
Went from an i5-7500T to an i7-7700T and 256Gb NVMe to 512Gb NVMe SSD.
Reinstalled Windows 11 IoT Enterprise. It spent 30 minutes updating and now it works great 😀

Will be a deskphone via my Panasonic KX-NCP500UK PBX , Media player (MCE) using its CoRC touch screen, and streaming server via OBS to Youtube using the intergrated "capture card"

Reply 1825 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Hokayyyy, rounded up enough adapters and another monitor and am now fairly confident that I am not getting output from the R9 295X2 on any port.

I am straining to remember what the guy who sold it to me said about it, it was years ago. He was an IT and cybersec guy and was using it for password hashing, he told me it was not good for gaming, just for hashing, I dunno if that meant he had disabled ROPs and flashed custom BIOS. 4k was the new hawt back then so wasn't sure if he meant it didn't do AAA games at highest res any more or what. So might need additional GPU to see what is going on.

Now I gotta remember which GPU likes working on a 1x riser.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1826 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Don't
Panic

I know what's going on (are those letters big and friendly enough?)

The R9 295X2 is working exactly as well as it does on any B450 B550 or X570 board... it's throwing a shit fit over UEFI

Normal service will be resumed as soon as I feel like... well shortly after getting my head round how to flash this with shady 3rd party fix with no OS installed and getting a 2nd GPU working...

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1827 of 1838, by darry

User metadata
Rank l33t++
Rank
l33t++
BitWrangler wrote on 2026-11-17, 03:24:
Don't Panic […]
Show full quote

Don't
Panic

I know what's going on (are those letters big and friendly enough?)

The R9 295X2 is working exactly as well as it does on any B450 B550 or X570 board... it's throwing a shit fit over UEFI

Normal service will be resumed as soon as I feel like... well shortly after getting my head round how to flash this with shady 3rd party fix with no OS installed and getting a 2nd GPU working...

No CSM on those boards ?

Reply 1828 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

That's on my list to investigate.. hmmm yes appears to have it but defaults to disable when CMOS reset... gotta boot with something else first.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1829 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

It is obviously not afraid enough of me. I need to go find the 175 Watt soldering iron to menace it with...

Got one boot, with a GT1030 dangling off a 1x riser... forgot I had a usb stick in it, missed the BIOS screen, but since it was going let it boot so I could check the system info utils on the stick to see if the radeon happened to get picked up. It didn't. Not surprising if it didn't actually initialise.. well then I reboot and black screen... power all the way off... on, black screen.. grrr... wiggle jiggle... nothing again... jerkass POS.

Might be a works when cold thing, will try catching it tomorrow.

edit: other thoughts on that, the GF1030 when it was registering DPMI or whatever at first power up slowed things down enough to get detected, where on reboot it was already registered and R9 was too quick at putting the brakes on before GT1030 kicked in.

Last edited by BitWrangler on 2026-11-17, 15:22. Edited 1 time in total.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1830 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Well, sanity check time, it's not just me...
https://www.reddit.com/r/Amd/comments/jto4oe/ … well_does_this/
In particular. But other hints on forums around the web, a snippet here and there.

Basically, once I am past power problems (if even I can at the motherboard slot level on this board) and UEFI problems, then I hit crossfire support being absent problems and ability of the chipset to switch between the two GPUs on the card. Several reports of single Hawaii GPUs running fine in B350 up boards once the UEFI hurdle had been jumped. Almost nobody running a 295X2 in one, apart from this guy.. https://forum-en.msi.com/index.php?threads/b3 … -r295x2.330894/ who ran it second slot and could not POST it in primary. I would be amenable to using it that way round, but this is a one 16x slot board.

So thinking it's a total tech mismatch, and I should not chase my tail on it any longer.

Next move, the Ryzen B550 board gets one of the R9 390 cards, and I can try playing around with the R9 295x2 on a Haswell or AM3+ platform.

Think I am gonna swap the PSU out again, might need to chase the R9 295X2 due to it's 744W 12V single rail. A lowlier 500W single rail should handle a R9 390 fine.

Kinda pondering whether to risk the hassle of using a multi-rail PSU on it though... got one with 240W per rail on 3 rails.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1831 of 1838, by zapbuzz

User metadata
Rank Oldbie
Rank
Oldbie

playing with windows 11 on my Haswell system i learned to permanently pause windows update so it doesn't go loopy i can still update manually

Reply 1832 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Scenes from the chaos... but hypothetically...

Manager: You're letting the intern install GPUs now? Are you sure he knows how?
Lead hand IT: .... ... Yeaaaah, let me check on that...

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1833 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

I think I am deciding on the CoolerMaster MWE500 bronze, it's NIB, youngest PSU in the house. at 38A on the 12V it's just right with a bit of margin. I want to be averagely on the middle of the efficiency curve.

I have a very stout Kingwin fanless platinum, but thinking that this case would be dead air at the top unless the PSU is sucking it's own, so maybe not the best situation for it.

I feel like I have lost a PSU somewhere. Swear I had a boxed Corsair 650W at one point... though 650 is a funny number gotta wonder if it's a stretched 500 design or not. If you're lucky it's a derated 800 class, but I'd guess you'd know if you paid through the nose.

Lost the ambition to mess with the multirail unit, realised it's old enough to need a good inspection so meh. Though actually labelled it's rails to the wires so that was more helpful than some, save headaches. Could actually take 20A to one PCIe power, 20A to the other and leave the rest of machine on the other rails.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1834 of 1838, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

Well that was drama free, yoinked R9 295X2, installed R9 390 and it just worked. Turned out CSM was turned on all through the R9 295X2 shenanigans too.

On the basis of changing just one thing at once to not cause any more trouble, the 12V brute 750W stayed in there. I am not coming up with a good reason to pull it at present. Leaving it for now until any further plot twists require it.

Now I get to hook up some drives and install Linux.

Edit: that took a while but Ubuntu LTS trashpanda is on there now.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 1835 of 1838, by UCyborg

User metadata
Rank Oldbie
Rank
Oldbie

Installed and setup brand new port of uBlock Origin in Pale Moon.

https://github.com/SecondCityOsD/uBlock

Mind == blown

Arthur Schopenhauer wrote:

A man can be himself only so long as he is alone; and if he does not love solitude, he will not love freedom; for it is only when he is alone that he is really free.

Reply 1836 of 1838, by Standard Def Steve

User metadata
Rank Oldbie
Rank
Oldbie

Well I just made an interesting (re)discovery! My arcade/emulation PC is powered by an i7-11700K processor. For years I thought this thing had a 10700K in it. And yeah, I'm the doofus who actually ordered the parts and built this thing five years ago.

But in my defense, this has always been a tertiary-use computer at best. In fact, it autostarts Steam and Playnite as soon as it boots up. That's all it does. It runs arcade games! It's fun, man! It's very much the computer equivalent of a posh puppy. And I suppose it's because of this computer's decidedly unimportant raison d'etre that I just don't pay attention to what makes it tick.

Today however, I had all of that fun stuff minimized so that I could test out some stuff I vibe-slopped together specifically for this machine. To make it even more fun! And that's when I discovered the 11700K lurking within.

I was curious as to what kind of "free" performance I was getting out of the mini-upgrade I never knew I had, or had completely forgotten about. So I searched for benchmarks comparing the two processor generations, fully expecting to find 3D bar graphs set against shimmering rainbows depicting yuge, mongo +75% performance gains! But no. On a good day, the 11700K is 6% faster than the 10700K. On a bad day, the 11700K can chug down 50% more juice than the 10700K. And on what undoubtedly was the worst day, Steve Burke of Gamers Nexus called the 11th gen a waste of sand. Well fook me, no wonder I buried the memory of purchasing an 11700K.

"A little sign-in here, a touch of WiFi there..."

Reply 1837 of 1838, by myne

User metadata
Rank l33t
Rank
l33t

I graphed Intel's "top" chips single core cpuz scores normalised to 1ghz.
Ie score /ghz =normalised.

Practically the entire 2-10th gen ipc differences comes down to margin of error and probably memory speed bumps.
There was about 5% in it.
12th was a big jump.

That is one single core benchmark pulled by googling and plotting in excel. It isn't exactly science.

Other things changed. A 10900 should happily beat a 2700k in many other ways. Core count, memory bandwidth, raw ghz, etc.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 1838 of 1838, by lti

User metadata
Rank Member
Rank
Member

I never saw a single 2nd-gen chip perform as well as the benchmarks said they should have. Even 3rd-gen was a massive improvement over 2nd-gen. I've seen ultrabook-class Haswell (4th-gen) CPUs and even a C2D T7500 run circles around an overclocked 2600K in scientific/engineering applications and code compiling. (I also don't remember a 2700K existing, but I've heard multiple people talk about them.)

I must have also forgotten about 11th-gen being that bad. I need to add a year to my timeline for efficiency going down the toilet.

Yesterday, I got tired of the Internet being full of GTA VI ragebait and insulated my garage door. Today, I see that there's also a shortage of PCB materials. Is this why I don't sleep?