VOGONS


First post, by MaRCer

User metadata
Rank Newbie
Rank
Newbie

I bought a GeForce 7800GS from an obscure Chinese brand. It uses a reference PCB and features a GPU taken from a 7800GT (with a 20/7 configuration). The card seems to run fine—no artifacts or freezes—and it overclocks to 480/1500 MHz. It scores higher in 3DMark than the 6800 I had previously, though only by a small margin: the 6800 managed 4,100 points in 3DMark2005, while the 7800GS hit 4,500 points (or 5,100 when overclocked).
My system consists of an E5800 CPU at 3.5 GHz, a GA-8I865GME-775-RH motherboard, 2x1 GB of DDR1 RAM (running at 440 MHz, 3-4-4-8 timings), Windows XP SP2, and ForceWare drivers (versions 92 and 175), all powered by a 450W FSP power supply. Through some experimentation, I discovered that the card’s vertex shaders perform very poorly; in the "Feature Set" test, the pixel shaders run twice as fast as those on the 6800, but the vertex shaders are 2–3 times slower. Using RivaTuner, I tried disabling some of the vertex processors: leaving only one enabled causes a further drop in speed, but enabling three of them results in only a 10% performance loss compared to having all seven active. I also tested the card on another motherboard—one with a SiS651 chipset (it’s the best alternative I have)—and the situation remained the same. I even tried flashing the BIOS from an XFX card; although that version is designed for Samsung memory (while mine uses Hynix), the card’s behavior didn't change at all. So the problem lies specifically with the graphics card—but what kind of strange behavior is this, where the vertex processors are the ones lacking power or memory bandwidth, while the pixel processors have everything they need?