VOGONS


Reply 20 of 23, by NeoG_

User metadata
Rank Oldbie
Rank
Oldbie
TheMysteriousGray wrote on Today, 03:47:

If it came down to it and the PicoGUS is all I can use, would it be possible to use the Audigy 2 ZS solely for CD audio and CDROMs under DOS? I'm pretty sure there are drivers for initializing the A2ZS in pure DOS (though I dunno anything about their specifics), and I have an external mixer so mixing the two together is no issue.

That's what I do with my SB Live, it handles CD and multi-card mixing in DOS using EK1M. A tool for A2ZS was just released recently

SBEZS V1.0a - DOS Mixer for Sound Blaster Audigy 2 ZS

98/DOS Rig: BabyAT AladdinV, K6-2+/550, V3 2000, 128MB PC100, 20GB HDD, 128GB SD2IDE, SB Live!, SB16-SCSI, PicoGUS, WP32 McCake, iNFRA CD, ZIP100
XP Rig: Lian Li PC-10 ATX, Gigabyte X38-DQ6, Core2Duo E6850, ATi HD5870, 2GB DDR2, 2TB HDD, X-Fi XtremeGamer

Reply 21 of 23, by TheMysteriousGray

User metadata
Rank Member
Rank
Member

Cool!

I think tomorrow I’m going to try and get DOS installed, so I can test this card in DOS to see if it just doesn’t like Win98 for whatever reason. If it works, I can just disable it in Win98 and make do with the emulated SB16 drivers from the Audigy if I REALLY need them in Windows. I’ll have to figure things out a little more hardware-wise to keep CD audio working in both DOS and Windows, but this program should help.

Reply 22 of 23, by TheMysteriousGray

User metadata
Rank Member
Rank
Member

Installed DOS, installed the AWE64 drivers, and exactly the same problem is occurring. Duke3D says playback fails even though the card is detected and configured and all the settings match, and MIDI data is being detected and sent through the card but no actual MIDI sound is heard.

I really hope it isn't a board issue, but other than some BIOS option I haven't flipped on, I cannot for the life of me imagine why both DOS and Windows can detect and set up this card, but it won't run.

Reply 23 of 23, by TheMysteriousGray

User metadata
Rank Member
Rank
Member

I used DIAGNOSE.EXE to test the card, and it says there's a failure setting IRQ at 5. I flipped IRQ 5 back to PnP in the BIOS and tested again and I got the same error.