First post, by jim78b
- Rank
- Member
i have a 1084s CGa monitor with video in db9 how i can coonect my pc to' it?
i have a 1084s CGa monitor with video in db9 how i can coonect my pc to' it?
The commodore 1084S is an ordinary 50hz RGB monitor with composite video.
and so...i will buy adapter?make a cable?
Forget it. Modern PCs won't ever output 640x200x1/320x200x2 required for it anyway. (The CGA monitor that is)
You would need a CGA card. The problem is, many CGAs do not fit into 16-bit ISA slots because of the shape of the board.
TV-out 😉
1+1=10
there is vga to' rgb CGa converter.the s video signal is disturbed can i have a one better?
You could try an ATi Graphics Solution Plus. These are 100% compatible CGA clones, and are quite sort in length, so there is no "skirt" that prevents installation in a 16-bit ISA slot.
"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium
Why don't you use that monitor with your euro pc, which has cga card?
because euro pc is too old , in a modern pc desktop i will use dosbox with my cga monitor....understand?
the vga to cga adpter will be ok, but a question ,it has a rgb cable with 5 pin i will make a cable for it.....5pin to db9 is only problem....
http://www.arcadespareparts.com/arcade_parts/ … rter/12215.html
But I think dosbox has a cga option, doesn't it?
yes but it is the same of the original cga monitor? what do you think about?!
Well, in my opinion, if you have a vga card/monitor, there is no such a great difference, as it is compatible with ega/cga modes. I wouldn't mind using dosbox also. I don't think you're missing much compared to the original cga monitor, and certainly it would be less harm to your eyes.
wrote:because euro pc is too old , in a modern pc desktop i will use dosbox with my cga monitor....understand?
I am pretty sure that this is impossible ...
Your best bet might be to ask on an arcade/MAME forum about the CGA adapter. A lot of old arcade machines used some variant of CGA and some people build MAME cabinets with CGA monitors in them.
One thing I noted with that adapter you linked:
Output CGA Signal: 480i@60 Hz
I didn't think this was a valid video mode for the type of CGA used in PC's? I thought that only 320x200 or 640x200 were used. Will your monitor handle this video mode?
If you are squeamish, don't prod the beach rubble.
ok now i will see how dosbox emu cga mode, if i don't satisfed i buy a arcade vga, or i see a real pci cga card, but window xp support two video cards?
ps another more less expensive solution is use software, powerstrip or soft15khz..!
Yes windows XP does indeed support dual monitor output on two different video cards. As far as I know, you can't use onboard graphics on your motherboard and another video card; you need two seperate video cards.
As for a PCI CGA card, I very much doubt such a thing exists, CGA was obsolete before PCI came about, a quick google didn't show anything. The only CGA cards you'd find would be ISA or maybe MCA I'd imagine.
If you are squeamish, don't prod the beach rubble.