Okay, these are my current bios settings for chipset features
ISA Bus Clock - 1/4 PCI
LBD# Sample Point - End of T2
Cache write cycle - 2CCLK
cache burst read cycle - 1 CCLK
l2 cache/dram cycle ws - 2CCLK
Dram ras to cas delay - 2CCLK
Dram write cycle - 0WS
Dram write cas pulse - 1CCLK
dram cas precharge time 1CCLK
Dram ras to ma delay - 2 CCLK
dram speed - fastest
dram slow refresh - disable
cpu internal cache - write back
l2 cache policy - write through
l2 cache tag bits - 8 bits
And as above these are the pci chipset featres
master arbitration control (weak) - STRONG
cpu-pci mem post write buffer (disable) ENABLE
cpu-pci memory burst write (disable) ENABLE
pci master burst write (disable) ENABLE
I was able to find the cyrix enhancements and I have been successful in increasing benchmark scores, I turned all these features on
RSTK_EN
BTB_EN
LOOP_EN
LSSER
USE_WBAK
WT1
BWRT
LINBRST
FP_FAST
MEM_BYP
DTE_EN
Now with speedsys
memory bandwidth - 133.77MB/S
CPU - 66.30
3D Bench v1.0 - 90.9fps ,
PCPbench - 10.4fps - would lock up unless rstk_en=off
In windows 98 SE BTB_EN=off as it locks the system straight away, testing 3dfx Quake 2 in 640X480 gives
9.4fps with sound, 9.8fps without,
Quake 1.06 timedemo 2, 320x200 no sound
no cyrix enhancements - 13.9fps
with enhancements - 14.4fps
Bit dissapointed with the Quake scores but everything else looks good, am I supposed to run UNIVBE or any other dos video driver?