If you're running 64 bit Windows with a large amount of memory then the Audigy microphone doesn't work. There was some registry workaround [download link in the Creative forum IIRC] that limited the amount of RAM that could be addressed but that didn't work for me either. Solution is to use a different input.

Sadly, Creative and Windows Vista [& above] don't have a happy relationship!

Creative just never wrote decent x64 drivers for Audigy or Live. Audigy works OK if you have <=4GB RAM. The whole XFi line works fine though, which is getting ancient and cheap now too.

The kx drivers might work. They are certainly not trouble free on Vista/7 though.

Windows XP 32bit 3gb memory

Odd then. My Audigy 2 ZS was absolutely fine under Windows XP (I only had 2GB but that shouldn't matter .. unless you're running with the 3GB switch enabled?).

I was running the latest drivers at the time - those were the ones before the last set released.

You haven't got any onboard sound enabled as well have you? Have a look in the Windows Sounds Control Panel applet for what devices are being assigned to what function.

RaVeN-05 wrote:

Windows XP 32bit 3gb memory

I use this for XP, Vista and 7.
http://nomoregoatsoup.wordpress.com/2010/04/2 … pport-pack-3-8/

Try to uninstall what you currently have installed and see if this works for you. It will run any Audigy card (1-4), except the budget cards without the real Audigy DSP.

have onboard Realtek HD Audio, so will try to disable them.
Thanks to replies will try all suggestions, hope something can help me to enable audio recording.