…Show last 185 lines
61scaler=hq3x
62
63[cpu]
64# core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.
65# Possible values: auto, dynamic, normal, simple.
66# cputype: CPU Type used in emulation. auto is the fastest choice.
67# Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
68# cycles: Amount of instructions DOSBox tries to emulate each millisecond.
69# Setting this value too high results in sound dropouts and lags.
70# Cycles can be set in 3 ways:
71# 'auto' tries to guess what a game needs.
72# It usually works, but can fail for certain games.
73# 'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.
74# (Example: fixed 4000).
75# 'max' will allocate as much cycles as your computer is able to handle.
76#
77# Possible values: auto, fixed, max.
78# cycleup: Amount of cycles to decrease/increase with keycombo.(CTRL-F11/CTRL-F12)
79# cycledown: Setting it lower than 100 will be a percentage.
80
81core=auto
82cputype=auto
83cycles=auto
84cycleup=10
85cycledown=20
86
87[mixer]
88# nosound: Enable silent mode, sound is still emulated though.
89# rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
90# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
91# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
92# Possible values: 1024, 2048, 4096, 8192, 512, 256.
93# prebuffer: How many milliseconds of data to keep on top of the blocksize.
94
95nosound=false
96rate=44100
97blocksize=1024
98prebuffer=20
99
100[midi]
101# mpu401: Type of MPU-401 to emulate.
102# Possible values: intelligent, uart, none.
103# mididevice: Device that will receive the MIDI data from MPU-401.
104# Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
105# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.
106# See the README/Manual for more details.
107
108mpu401=intelligent
109mididevice=default
110midiconfig=
111
112[sblaster]
113# sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
114# Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
115# sbbase: The IO address of the soundblaster.
116# Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
117# irq: The IRQ number of the soundblaster.
118# Possible values: 7, 5, 3, 9, 10, 11, 12.
119# dma: The DMA number of the soundblaster.
120# Possible values: 1, 5, 0, 3, 6, 7.
121# hdma: The High DMA number of the soundblaster.
122# Possible values: 1, 5, 0, 3, 6, 7.
123# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
124# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
125# Possible values: auto, cms, opl2, dualopl2, opl3, none.
126# oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
127# Possible values: default, compat, fast.
128# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
129# Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.
130
131sbtype=sb16
132sbbase=220
133irq=7
134dma=1
135hdma=5
136sbmixer=true
137oplmode=auto
138oplemu=default
139oplrate=44100
140
141[gus]
142# gus: Enable the Gravis Ultrasound emulation.
143# gusrate: Sample rate of Ultrasound emulation.
144# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
145# gusbase: The IO base address of the Gravis Ultrasound.
146# Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
147# gusirq: The IRQ number of the Gravis Ultrasound.
148# Possible values: 5, 3, 7, 9, 10, 11, 12.
149# gusdma: The DMA channel of the Gravis Ultrasound.
150# Possible values: 3, 0, 1, 5, 6, 7.
151# ultradir: Path to Ultrasound directory. In this directory
152# there should be a MIDI directory that contains
153# the patch files for GUS playback. Patch sets used
154# with Timidity should work fine.
155
156gus=false
157gusrate=44100
158gusbase=240
159gusirq=5
160gusdma=3
161ultradir=C:\ULTRASND
162
163[speaker]
164# pcspeaker: Enable PC-Speaker emulation.
165# pcrate: Sample rate of the PC-Speaker sound generation.
166# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
167# tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
168# Possible values: auto, on, off.
169# tandyrate: Sample rate of the Tandy 3-Voice generation.
170# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
171# disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).
172
173pcspeaker=true
174pcrate=44100
175tandy=auto
176tandyrate=44100
177disney=true
178
179[joystick]
180# joysticktype: Type of joystick to emulate: auto (default), none,
181# 2axis (supports two joysticks),
182# 4axis (supports one joystick, first joystick used),
183# 4axis_2 (supports one joystick, second joystick used),
184# fcs (Thrustmaster), ch (CH Flightstick).
185# none disables joystick emulation.
186# auto chooses emulation depending on real joystick(s).
187# (Remember to reset dosbox's mapperfile if you saved it earlier)
188# Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
189# timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
190# autofire: continuously fires as long as you keep the button pressed.
191# swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
192# buttonwrap: enable button wrapping at the number of emulated buttons.
193
194joysticktype=auto
195timed=true
196autofire=false
197swap34=false
198buttonwrap=false
199
200[serial]
201# serial1: set type of device connected to com port.
202# Can be disabled, dummy, modem, nullmodem, directserial.
203# Additional parameters must be in the same line in the form of
204# parameter:value. Parameter for all types is irq (optional).
205# for directserial: realport (required), rxdelay (optional).
206# (realport:COM1 realport:ttyS0).
207# for modem: listenport (optional).
208# for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
209# transparent, port, inhsocket (all optional).
210# Example: serial1=modem listenport:5000
211# Possible values: dummy, disabled, modem, nullmodem, directserial.
212# serial2: see serial1
213# Possible values: dummy, disabled, modem, nullmodem, directserial.
214# serial3: see serial1
215# Possible values: dummy, disabled, modem, nullmodem, directserial.
216# serial4: see serial1
217# Possible values: dummy, disabled, modem, nullmodem, directserial.
218
219serial1=dummy
220serial2=dummy
221serial3=disabled
222serial4=disabled
223
224[dos]
225# xms: Enable XMS support.
226# ems: Enable EMS support.
227# umb: Enable UMB support.
228# keyboardlayout: Language code of the keyboard layout (or none).
229
230xms=true
231ems=true
232umb=true
233keyboardlayout=auto
234
235[ipx]
236# ipx: Enable ipx over UDP/IP emulation.
237
238ipx=false
239
240[autoexec]
241# Lines in this section will be run at startup.
242# You can put your MOUNT lines here.
243mount c: C:\DOSBox\programs
244mount d: C:\DOSBox\programs\GAMES\HARVEST\ -t cdrom
245mount e: d:\ -t cdrom