PNY Quickchip 5x86 Trinity Works dip settings \ VOGONS

Reply 1 of 7, by n1mr0d

Posted on 2014-08-13, 13:26

n1mr0d Offline

Rank Newbie

Rank: Newbie
Posts: 66
Joined: 2008-01-25, 12:52
Location: Netherlands

No one? I have to put it in a Socket 1 LIF socket, so i don't have the freedom to check each setting.

VooDoo Power Asus CUBX-E 440BX PIII 1.4GHz GF4 Ti 4600 Voodoo2 SLI 12MB SBLive!+Drive SB16 CT2230 + NEC XR385
Nostalgia pc Vtech Laser Slimline DX4-100 16MB Acumos AVGA1 AWE32 CT3980 Roland MPU 401 MT32 SC88

Reply 2 of 7, by smeezekitty

Posted on 2014-08-13, 17:29

smeezekitty Offline

Rank Oldbie

Rank: Oldbie
Posts: 1302
Joined: 2009-09-26, 18:28

Is this a 486-like cpu?
Chances are it is a rebrand of an AMD or Cyrix 5x86
You could try those settings. As long as the voltage is at 3v I don't think anything willget damaged

Reply 3 of 7, by JaNoZ

Posted on 2014-08-13, 19:28

JaNoZ Offline

Rank Member

Rank: Member
Posts: 454
Joined: 2012-09-30, 19:46
Location: Netherlands

It is an am5x86 133.

Use the enhanced am486 dx4 settings.

Reply 4 of 7, by Anonymous Coward

Posted on 2014-08-14, 02:29

Anonymous Coward Offline

Rank l33t++

Rank: l33t++
Posts: 5023
Joined: 2008-03-20, 05:37
Location: Shandong, China

Trinity works made several different versions of their adapter. Which revision do you have?

"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium

Reply 5 of 7, by n1mr0d

Posted on 2014-08-14, 08:45

n1mr0d Offline

Rank Newbie

Rank: Newbie
Posts: 66
Joined: 2008-01-25, 12:52
Location: Netherlands

I have revision E, there are 12 dip switches on the back.

VooDoo Power Asus CUBX-E 440BX PIII 1.4GHz GF4 Ti 4600 Voodoo2 SLI 12MB SBLive!+Drive SB16 CT2230 + NEC XR385
Nostalgia pc Vtech Laser Slimline DX4-100 16MB Acumos AVGA1 AWE32 CT3980 Roland MPU 401 MT32 SC88

Reply 6 of 7, by n1mr0d

Posted on 2014-08-14, 12:07

n1mr0d Offline

Rank Newbie

Rank: Newbie
Posts: 66
Joined: 2008-01-25, 12:52
Location: Netherlands

QAPLA!

Got it from archive.org

http://web.archive.org/web/19980415093529/htt … switchreve.html

http://web.archive.org/web/19990913211357/htt … ddsettings.html

What is "Pass Through" though?

Last edited by n1mr0d on 2014-08-14, 16:19. Edited 1 time in total.

VooDoo Power Asus CUBX-E 440BX PIII 1.4GHz GF4 Ti 4600 Voodoo2 SLI 12MB SBLive!+Drive SB16 CT2230 + NEC XR385
Nostalgia pc Vtech Laser Slimline DX4-100 16MB Acumos AVGA1 AWE32 CT3980 Roland MPU 401 MT32 SC88

Reply 7 of 7, by Anonymous Coward

Posted on 2014-08-14, 12:30

Anonymous Coward Offline

Rank l33t++

Rank: l33t++
Posts: 5023
Joined: 2008-03-20, 05:37
Location: Shandong, China

I believe that leaves control of writeback/writethough to the jumpers on your motherboard (if present), though I doubt there are too many 5V only boards that allow write back.

"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium

Main menu