First post, by Subjunctive
- Rank
- Newbie
I've been turning an Aptiva 2168-M71 into an all-purpose DOS gaming machine. Since it had a spare bay, I decided I also wanted to use it for reading the odd 5.25" disk that I came across. So I picked up a Toshiba ND-0802GR and stuck it in:
I left the jumpers and settings for the other drives as they were. When I booted, it sent me to the BIOS since it detected a configuration change, where it reported that it found the 5.25" drive - and nothing else. No 3.5", no CD-ROM, no hard drive.
This is the first drive-level change I've made on this machine, and it's been so long since I dealt with the rules around this stuff. Any guidance would be greatly appreciated.