hi there
first time i couldnt figure out how to get a game working with dosbox.
when trying to start the game via pre set .cfg game crashes after intro screen "Illegal address has caused a page fault". trying to set video via microprose installer "cant enter video mode". this happens each time.

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 4

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
HPET timer 14.318 MHz
Perf timer 3.039 MHz
Sys timer 1.000 KHz
BCLK timer 8197842.50 MHz

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q9550
Codename Yorkfield
Specification Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping E0
Technology 45 nm
TDP Limit 95 Watts
Core Speed 3115.2 MHz
Multiplier x Bus Speed 8.5 x 366.5 MHz
Rated Bus speed 1466.0 MHz
Stock frequency 2833 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.5x
Max VID 1.238 V

Chipset
-------------------------------------------------------------------------

Northbridge Intel G41 rev. A3
Southbridge Intel 82801GB (ICH7/R) rev. A1
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 8192 MBytes
Channels Dual, (Symmetric)
Memory Frequency 733.0 MHz (1:2)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Row Refresh Cycle Time (tRFC) 107
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096

Memory SPD
-------------------------------------------------------------------------

DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Patriot Memory (7F7F7F7F7F020000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 1333EL Series
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes
XMP revision 1.2
AMP no

DIMM # 2
SMBus address 0x52
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Patriot Memory (7F7F7F7F7F020000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 1333EL Series
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes
XMP revision 1.2
AMP no

Monitoring
-------------------------------------------------------------------------

Mainboard Model P5G41T-M LX (0x000002C3 - 0x5FB45380)

Graphics
-------------------------------------------------------------------------

Number of adapters 1

Graphic APIs
-------------------------------------------------------------------------

API NVIDIA I/O

Display Adapters
-------------------------------------------------------------------------

Display adapter 0
Name NVIDIA GeForce GTX 760
Revision A2
Codename GK104
Technology 28 nm
Memory size 2048 MB
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x196E)
Model ID 0x1187 (0x0984)
Performance Level 0

Win32_VideoController AdapterRAM = 0x80000000 (2147483648)

Software
-------------------------------------------------------------------------

Windows Version Microsoft Windows 7 (6.1) Enterprise Edition 64-bit Service Pack 1 (Build 7601)
DirectX Version 11.0