Benchmark comparisons for Ti486DLC/SXL/SXL2/DRx2/BL3 \ VOGONS

Benchmark comparisons for Ti486DLC/SXL/SXL2/DRx2/BL3

Topic actions

First post, by feipoa

Posted on 2015-11-27, 04:31

feipoa Offline

Rank l33t++

Rank: l33t++
Posts: 10403
Joined: 2011-03-07, 13:54
Location: Canada

Does anyone have any benchmark comparisons for the Ti486DLC-40, Ti486SXL-40, Ti486SXL2-50, Ti486SXL2-66, Cyrix DRx2-50, Cyrix DRx2-66 all, IBM BL3-75, and IBM BL3-100 on the same system with identical hardware? These chips constitute the PGA-132 direct plug-in "486" upgrades.

Plan your life wisely, you'll be dead before you know it.

Reply 1 of 2, by 386_junkie

Posted on 2017-02-11, 00:42

386_junkie Offline

Rank Oldbie

Rank: Oldbie
Posts: 1034
Joined: 2014-04-15, 20:02

feipoa wrote:
Does anyone have any benchmark comparisons for the Ti486DLC-40, Ti486SXL-40, Ti486SXL2-50, Ti486SXL2-66, Cyrix DRx2-50, Cyrix DRx2-66 all, IBM BL3-75, and IBM BL3-100 on the same system with identical hardware? These chips constitute the PGA-132 direct plug-in "486" upgrades.

I could try on the same system; - Ti486DLC-40, Ti486SXL2-50, Ti486SXL2-66, Cyrix DRx2-66, and IBM BL2-66.

IBM BL3-75, and IBM BL3-100 are fixed on the motherboard but can be compared against any 486 CPU.

So many projects, so little time.

Compaq Systempro; EISA Dual 386 ¦ Compaq Junkiepro; EISA Dual 386 ¦ ALR Powerpro; EISA Dual 386

EISA Graphic Cards ¦ EISA Graphic Card Benchmarks

Reply 2 of 2, by feipoa

Posted on 2017-02-11, 01:53

feipoa Offline

Rank l33t++

Rank: l33t++
Posts: 10403
Joined: 2011-03-07, 13:54
Location: Canada

I am getting to the point where I can at least benchmark my BL3-75/100 and compare it to the DLC, SXL, SXL2, DRx2, etc all on the same motherboard. Unfortunately, I will have almost zero time for quite some time.

Where did you get an SXL2-66? Is it soldered onto a motherboard?

Plan your life wisely, you'll be dead before you know it.

Go to top of page Go to top of page

Back to General Old Hardware