VOGONS

Choosing Synth on AWE32 with DB

Topic actions

First post, by boxpressed

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

I have a CT3900 AWE32. It has the 4.13 DSP but also the CT1747 bus interface, so there *should* be no illegitimate hanging notes.

I have a 4MB Dream synth DB on the card, but I also have 32MB of RAM that I use for loading a 25MB sound font.

I'm not exactly sure how to select between these two options for GM when I launch DOS games from a Windows DOS box.

Do the tick boxes in the Device Selection (see pic below) have anything to do with it? Thanks in advance for any help!

The attachment IMG_1425.JPG is no longer available

Reply 1 of 3, by alexanrs

Posted on 
User metadata
Rank l33t
Rank
l33t

Try disabling that "Allow MPU401 emulation on the device" checkbox.

Reply 2 of 3, by PhilsComputerLab

Posted on 
User metadata
Rank l33t++
Rank
l33t++

Maybe the mixer has an option too?

YouTube, Facebook, Website

Reply 3 of 3, by boxpressed

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Thanks guys. I believe that checking the box uses the soundfont and unchecking the box uses the DB. I tested it with the Tyrian setup, which is a nice way to check all three banks, including the EMU8K.

I was having the hardest time understanding what "Allow MPU401 Emulation on this device" meant for the synths. Still not intuitive to me, I'm afraid.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window