Issues mounting older motherboard in a newer case \ VOGONS

Issues mounting older motherboard in a newer case

Topic actions

First post, by TheAbandonwareGuy

Posted on 2016-07-02, 00:44

TheAbandonwareGuy Offline

Rank Oldbie

Rank: Oldbie
Posts: 1589
Joined: 2016-03-01, 02:09
Location: Southern Illinois, United States of America

Ok, so my current build is NOT going well. Im currently trying to install a EVGA 680I SLI (early 07) Motherboard into a CoolerMaster CM690 II Advanced case (Late 2013). Everything went well until i tried to install the heatsink when i relized the case has no standoffs for screwing in the CPU Cooler. Theres just a large cutout directly behind the CPU. A friend mentioned that some older boards have a backplate to install. Am i missing that? I cant find any reference to this board having ever had one.

Are newer cases incomptible with older motherboards or something?

Cyb3rst0rm.com: Here There Be Screeds https://www.cyb3rst0rm.com
I used to own over 160 graphics card, I've since recovered from graphics card addiction

Reply 1 of 5, by PhilsComputerLab

Posted on 2016-07-02, 00:51

PhilsComputerLab Offline

Rank l33t++

Rank: l33t++
Posts: 6174
Joined: 2014-09-28, 03:33
Location: Western Australia

Cases do not have any stand-offs to mount coolers 😀

The hole you see in your case is to allow mounting coolers, that use back-plates, without removing the motherboard.

I don't know what cooler you have, but it seems that you're missing the back-plate and mounting screws?

Got any other coolers lying around? Push pin type coolers don't need back-plates.

YouTube, Facebook, Website

Reply 2 of 5, by Jade Falcon

Posted on 2016-07-02, 00:52

Jade Falcon Offline

Rank BANNED

Rank: BANNED
Posts: 3216
Joined: 2016-05-08, 19:23
Location: Nar Shaddaa.

I think you need a backplate on the mobo behind the heat sink.

Reply 3 of 5, by TheAbandonwareGuy

Posted on 2016-07-02, 00:55

TheAbandonwareGuy Offline

Rank Oldbie

Rank: Oldbie
Posts: 1589
Joined: 2016-03-01, 02:09
Location: Southern Illinois, United States of America

Yeah the heatsink was stolen out of an Emachines, Oh well, i already folded my parts back into the PC that I had running so ill give building this another go tommorow if i can summon up a backplate.

Cyb3rst0rm.com: Here There Be Screeds https://www.cyb3rst0rm.com
I used to own over 160 graphics card, I've since recovered from graphics card addiction

Reply 4 of 5, by FFXIhealer

Posted on 2016-07-02, 01:32

FFXIhealer Offline

Rank Oldbie

Rank: Oldbie
Posts: 721
Joined: 2016-06-22, 17:42
Location: Lake Charles, Louisiana (U.S.A.)

TheAbandonwareGuy wrote:
Yeah the heatsink was stolen out of an Emachines, Oh well, i already folded my parts back into the PC that I had running so ill give building this another go tommorow if i can summon up a backplate.

In the USA, I can pick up an LGA775 CPU cooler brand new for about $10 and it will come with a backplate for the motherboard with it. Check it.

Reply 5 of 5, by Jorpho

Posted on 2016-07-02, 05:10

Jorpho Offline

Rank l33t++

Rank: l33t++
Posts: 8169
Joined: 2003-02-14, 19:50
Location: Canada

TheAbandonwareGuy wrote:
A friend mentioned that some older boards have a backplate to install.

Some coolers require backplates, and some don't; it's not really a matter of the motherboard.

I once went through a lot of trouble trying to change the cooler on an old motherboard before I realized that it had a backplate stuck to the back, and that unless I pried it off, I wouldn't be able to use a different, push-pin cooler. What a headache that was.

Go to top of page Go to top of page

Back to General Old Hardware