First post, by tikoellner
- Rank
- Member
Hi there,
yesterday finally I set up all the elements that I needed to test my 486 build.
I use Asus VL/I-486SV2GX4 motherboard. I set the jumpers in accordance with the instructions on Asus website. First I attempted running it with 486DX2/66, later switched to 486DX/33. I tried three different RAM modules, two PSUs and two cards (i am not sure if they work).
The symptoms are as follows:
- There is only one faint beep EXACTLY when the PSU is turned on and another one when it's turned off. There are no other beeps so far (maybe I'm connecting the buzzer wrong, but I don't think that's the issue).
- The CPU gets slightly warm.
- There is no reaction on the monitor whatsoever.
I inspected the board and I see no visible signs of damage, as cut traces, etc. All the chips are in their sockets. As far as I see, the jumpers are also right.
I am desperate to get this mobo running. Could you advice me what to do?
I post the picture of my current settings below: