Hi, Some Olivetti Setup disks are mentioned here: http://forum.ixbt.com/topic.cgi?id=4:35324
I haven't tested them, though. Also, was the floppy enabled by default ?
If so, you could try to clear the CMOS by removing the battery or setting a jumper.
But be warned, this would likely reset the HDD configuration, too..
So in case the Olivetti hasn't installed the original hard disk,
you won't be able to boot again (except if these floppies work). 🙁
Edit; If you could hook up the Olivetti HDD to another PC,
you could *perhaps* re-install the setup partition there by booting the Olivetti floppies.
In theory, at least. The believe the Compaq floppies had such a feature.
"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel
//My video channel//