Can anyone identify this socket 7 motherboard? \ VOGONS

Can anyone identify this socket 7 motherboard?

Topic actions

First post, by blackmasked

Posted on 2017-12-19, 14:34

blackmasked Offline

Rank Newbie

Rank: Newbie
Posts: 68
Joined: 2016-11-19, 17:11

I believe it's a Digimate DM-11190, brand I have never heard of btw, but I struggle to find any info regarding this board.
The only thing I was able to find so far is on yjfy.com, but they list it as DM-11190-1 not DM-11190.

The attachment mobo1.jpg is no longer available

DOS build: Gigabyte GA-586T2, P200 MMX, 64MB RAM, Tseng ET6000 4MB, Sound Blaster AWE64 Gold, Roland SC-55mkII, Yamaha MU-80
98SE build: MSI MS-6163 Pro, PIII 650MHz, 256MB RAM, Voodoo3 3000, Sound Blaster Live! 5.1 Platinum, Yamaha SW1000XG

Reply 1 of 2, by fitzpatr

Posted on 2017-12-20, 06:22

fitzpatr Offline

Rank Member

Rank: Member
Posts: 419
Joined: 2016-10-30, 06:50
Location: Ontario, Canada

My searching indicates that it is a PCPartner VIB876S.

This is a Baby-AT MVP4 based board. Value oriented and highly integrated.

A manual can be found at the link.
http://support.pcpartner.com/support/bios/VIA694.HTM

MT-32 Old, CM-32L, CM-500, SC-55mkII, SC-88Pro, SC-D70, FB-01, MU2000EX
K6-III+/450/GA-5AX/G400 Max/Voodoo2 SLI/CT1750/MPU-401AT/Audigy 2ZS
486 Build

Reply 2 of 2, by blackmasked

Posted on 2017-12-20, 19:48

blackmasked Offline

Rank Newbie

Rank: Newbie
Posts: 68
Joined: 2016-11-19, 17:11

Excellent detective work, Sir.
It's a nimble little board isn't it?
Two COM ports, two USB ports, PS/2 mouse connector, integrated sound and graphics processor.
Not expecting much in terms of intergrated sound chip, as it is seems to be an early AC97 Audio Controller, but the IGP is a Trident Blade3D, so at least for DOS it should be fairly decent.
Hopefully after all the caps are replaced it will come back to life.

Thanks again fellow.

Go to top of page Go to top of page

Back to General Old Hardware