VOGONS

Looking for jumper settings for old EGA card

Topic actions

First post, by jesolo

Posted on 
User metadata
Rank l33t
Rank
l33t

I've recently came into possession of an old EGA card which appears to be have been made by Nel Electronics.
I've attached a picture of the exact card that I have (only difference is the label on my BIOS chip which reads: "EGA + P + M BIOS 5.94").

EGA card.jpg

I was hoping that someone might have the jumper settings for this card.

Reply 1 of 5, by SSTV2

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Got same card, jumper settings can be found on TH99.

Reply 2 of 5, by jesolo

Posted on 
User metadata
Rank l33t
Rank
l33t
SSTV2 wrote:

Got same card, jumper settings can be found on TH99.

My eyes didn't catch it - can you post a link for me?

Reply 3 of 5, by Anonymous Coward

Posted on 
User metadata
Rank l33t
Rank
l33t

NEL should be the same company as "Juko" if that helps.

Also, if it really does "1024" lines as stated on the BIOS chip, that would be a pretty impressive extended EGA card.

"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium

Reply 4 of 5, by keropi

Posted on 
User metadata
Rank l33t++
Rank
l33t++

I have almost the exact same card (different BIOS, you have the 74LS74 populated and your main IC must be newer as well)

p5cofAVl.jpg

it's a good and fast EGA card , settings are here (not the same layout in the picture but it's fine) http://stason.org/TULARC/pc/graphics-cards/I- … TIMATE-EGA.html

🎵 🎧 ⏳ ⚡ PCMIDI MPU , OrpheusII , Action Rewind , Megacard and 🎶GoldLib soundcard website

Reply 5 of 5, by jesolo

Posted on 
User metadata
Rank l33t
Rank
l33t

Excellent - that helps quite a lot.

Go to top of page Go to top of page
Back to Video
Close window
Close window