HP Vectra 6 xu Power switch \ VOGONS

HP Vectra 6 xu Power switch

Topic actions

First post, by BojanHC

Posted on 2018-03-01, 10:12

BojanHC Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2018-02-28, 16:29

Heloo.
I recently brought this old HP Vectra 6 xu board with 128 mb of ram,i had already pentium pro cpu but when i connect atx power supply i cannot turn machine on.Can someone help about this problem is it possible to use standard atx power unit with this board and where on the board is located power jumpers?

Reply 1 of 4, by oeuvre

Posted on 2018-03-01, 13:48

oeuvre Offline

Rank l33t

Rank: l33t
Posts: 3231
Joined: 2015-03-31, 13:31
Location: USA

It might use a proprietary one. I think the part # is 5063-8799

HP Z420 Workstation Intel Xeon E5-1620, 32GB, RADEON HD7850 2GB, SSD + HD, XP/7

Reply 2 of 4, by BojanHC

Posted on 2018-03-01, 16:17

BojanHC Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2018-02-28, 16:29

Thanks for the info,
Is there any way modding the regular atx power supply?

Reply 3 of 4, by oeuvre

Posted on 2018-03-01, 16:18

oeuvre Offline

Rank l33t

Rank: l33t
Posts: 3231
Joined: 2015-03-31, 13:31
Location: USA

Not that I am aware of.

HP Z420 Workstation Intel Xeon E5-1620, 32GB, RADEON HD7850 2GB, SSD + HD, XP/7

Reply 4 of 4, by BojanHC

Posted on 2018-03-01, 17:11

BojanHC Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2018-02-28, 16:29

oeuvre wrote:
Not that I am aware of.

i found this pinout,What do you think maybe can be done by changing wires position on conector>
http://pinouts.ru/visual/gen/hp_psu.jpg

Go to top of page Go to top of page

Back to General Old Hardware