I think newer versions of emulators would call for Windows 7 these days.

For the things he mentioned (maybe except PSX), the old emulators are just fine and should work on either OS. If not XP, I would go with WinMe before Win98 SE, since you don't need the pure DOS mode.

dr_st wrote:

For the things he mentioned (maybe except PSX), the old emulators are just fine and should work on either OS. If not XP, I would go with WinMe before Win98 SE, since you don't need the pure DOS mode.

Older versions of ePSXe can still run under 98SE. Not sure about the newer version(1.8+)

Just dawned on me that I could also do Win2000 SP4.

i have the gateway variant of this similar setup and i was torn on what to do with this machine and in the end came up with the same idea. i would go 9200/9250 maybe mine cam with Wme but i was thinking 2k for better compatibility hmm dos box on a 32in seems interesting but sounds like failure at the same time.

It's up and running with XP SP3. The single biggest reason being that this machine is not connected to the internet or even the rest of my network, so being able to use USB storage to transfer files is critical and since all of my stuff is sitting on thumb drives and hard drives all formatted with NTFS. Last time I remember attempting to mount a USB drive didn't go so well.

Plus, it's the same machine I used in these two threads:

Quake III Arena Benchmark Thread
Matrox G400/G450 Quake III Performance

Here is a pretty good patch for supporting USB thumb drives in 98SE.

I had used this patch with no issues on 3-4 Win98-computers.
But the author tells it can cause some problems with IEEE1394.

Right now I am using it for my PIII-1000 and P-200, both are 98SE.

There are newer versions of said patch:
http://www.technical-assistance.co.uk/kb/win9 … age-drivers.php

(unfortunately you can have issues if your language is not one of the listed there)

I recently used it successfully on a Win98 SE (English) version, and it worked like a charm, including USB 2.0 support via a NEC CardBus controller.

Oh, thank you!