First post, by Vikingo
- Rank
- Newbie
Hello! I got a pcchips M919 motherboard. It has two connectors turbo related. One turbo sw and one turbo led, both with two pins each.
On the other hand i have a LED panel with a power connector to the PSU molex and an additional black single pin cable. Into the same LED panel comes out a yellow cable turbo led.
At last i got a turbo button switch with three cables.
If i plug the turbo button to the motherboard there is no link between the LED panel and the motherboard.
Anyone knows how i need to connect all this?
Thanks!