voodoo 1 driver problem \ VOGONS

voodoo 1 driver problem

Topic actions

First post, by deadfatty

Posted on 2019-06-06, 02:01

deadfatty Offline

Rank Newbie

Rank: Newbie
Posts: 5
Joined: 2019-05-18, 08:12
Location: China

Hi there! I got a T&W Voodoo Graphic card with 4M RAM and drivers(3.01.00) can be installed properly. While when I running dxdiag or GLQuake, it stucked in blackscreen, no response. Both 3dfx chips are extremely hot. What should I do? Thanks!

Reply 1 of 3, by deadfatty

Posted on 2019-06-06, 02:02

deadfatty Offline

Rank Newbie

Rank: Newbie
Posts: 5
Joined: 2019-05-18, 08:12
Location: China

my 2D accelerator is S3 Trio64V+/ViRGE DX.

Reply 2 of 3, by weldum

Posted on 2019-06-06, 04:34

weldum Offline

Rank Oldbie

Rank: Oldbie
Posts: 500
Joined: 2016-02-16, 07:25
Location: Mendoza-Arg

i suppose that you're using the Y cable that goes from the 2D to the voodoo, and then the monitor in the voodoo

DT: R7-5800X3D/R5-3600/R3-1200/P-G5400/FX-6100/i3-3225/P-8400/D-900/K6-2_550
LT: C-N2840/A64-TK57/N2600/N455/N270/C-ULV353/PM-1.7/P4-2.6/P133
TC: Esther-1000/Esther-400/Vortex86-366
Others: Drean C64c/Czerweny Spectrum 48k/Talent MSX DPC200/M512K/MP475

Reply 3 of 3, by Garrett W

Posted on 2019-06-06, 07:47

Garrett W Offline

Rank Oldbie

Rank: Oldbie
Posts: 707
Joined: 2018-09-23, 09:54

What processor are you using?

Go to top of page Go to top of page

Back to Video