Daewoo CPC-5200 P60/P66 Socket 4 motherboard

Daewoo CPC-5200 P60/P66 Socket 4 motherboard - info request

Topic actions

First post, by vmr_

Posted on 2019-09-02, 16:56

vmr_ Offline

Rank Member

Rank: Member
Posts: 125
Joined: 2018-09-06, 08:14

I cannot find any information online about this motherboard, maybe some of you encountered this motherboard? I am looking for jumpers settings and max supported memory, or any details you can share.

Chipset OPTi 82C596/597 (Cobra)

cpc-5200 mobo.JPG

Retro builds & sandbox
IBM XT 5160 | 286 | 386 | 486 | S4 SI5PI AIO & S4 Batman + P60 SX828
S8 & PPro 200 | SS7 FW 5VGF & Asus P5A & AOpen AX59PRO K6-III+ 550MHz
Asus K7M Athlon 1Ghz GDF | Abit SH6 Pentium III 1GHz SL4KL...

Reply 1 of 7, by arteq

Posted on 2019-09-02, 18:21

arteq Offline

Rank Member

Rank: Member
Posts: 104
Joined: 2015-11-16, 20:25

but I can see only one jumper settings JP5 , and on PCB you have all informations you need.
Regarding max memory I believe it will accept all kond of FPM modules 😀

Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing

Reply 2 of 7, by derSammler

Posted on 2019-09-02, 18:30

derSammler Offline

Rank l33t

Rank: l33t
Posts: 3886
Joined: 2017-04-14, 11:30

JP2 and JP3 are most likely Clear CMOS and BIOS flashing en./dis.

Given that there only is a 33.00 MHz crystal, it seems CPU speed is locked to 66 MHz.

Reply 3 of 7, by vmr_

Posted on 2019-09-02, 18:36

vmr_ Offline

Rank Member

Rank: Member
Posts: 125
Joined: 2018-09-06, 08:14

thx, CPU did not come with the motherboard, plan to use it for testing - but might need a 66MHz one if indeed locked to 66MHz

Reply 4 of 7, by vmr_

Posted on 2019-09-02, 18:41

vmr_ Offline

Rank Member

Rank: Member
Posts: 125
Joined: 2018-09-06, 08:14

JP1 in top left corner I assume is linked to battery...

Reply 5 of 7, by Anonymous Coward

Posted on 2019-09-03, 07:33

Anonymous Coward Offline

Rank l33t

Rank: l33t
Posts: 4868
Joined: 2008-03-20, 05:37
Location: Shandong, China

Hope you're ready for some craptastic Pentium performance. If you're lucky it might even support 64-bit memory! PCI is bridged to the VL-bus. Even though the board doesn't have the VLB slot soldered in, you still get to enjoy the benefits of sub-par PCI bandwidth.

BTW, I think at least in the early versions of P66 it required more than 5V. Something like 5.15V or more. You might want to make sure your board can actually drive a P66...a lot of boards back then weren't reliable at 66MHz.

"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium