VOGONS


486 Multimedia dream build ( 1993/94 )

Topic actions

First post, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

On the Quest for the Best Compatibility 486 computer of 1993. Not necessarily the fastest but a 486 computer with good quality DOS game and application compatibility and performance. This is the computer I would have liked to have had back in 1993/94
This was a strange time when computer manufactures were transitioning to Multimedia computers by adding CDROM drives and sound cards..
RAM was very expensive in 1993 at $100 per Megabyte. Sound cards and CDROM drives where also very expensive.
2x CDROM drives were what was available at the time.
Many Manufactures were offering a Multimedia computer with 486DX-33 CPU and 4mb ram, 2x CDROM and Sound Blaster compatible sound card.

Manufacture builds like:
IBM PS/1 486
AST Bravo 486
Gateway 2000 486
Dell Optiplex 486
HP Vectra 486

Building the Ultimate 486 computer ( NOT 5x86 ).
This may NOT be entirely period correct but this is what I would have liked back in 1993/94
The 2x CDROM drives were too slow for Multimedia CDROM play back of videos. They would seek allot.
And it is NOT easy finding a good AT case today. So the CDROM drive is NOT period correct.
I remember taking classes back in computer education school and realizing that the computers where too slow for
Some of the software they were using. So this is the computer I would have liked to have had back in 1993/94 when I was taking
Computer education classes.

This build probably would have cost over $5,000 back in 1994

————————————————-
Specs with 1994 retail consumer costs:

Motherboard - Gigabyte GA-486vs ( VLB ) ( $150 ) ( Cache did not work )
http://www.motherboards.org/files/manuals/47/486vs8a.pdf
Motherboard - Vega vs486f VLB ( Young Micro Systems inc. ) ( $150 ).
http://www.elhvb.com/webhq/models/486vlb3/vs486f.html
CPU - Intel 486dx4-100 Overdrive ( $300 )
Cache - 256kb, -20ns
RAM - 32mb. ( 8 x 4mb, -60 ns , FPM ) ( $3200 )
Hard-drive - 240mb. ( IDE ) ( $240 )
Video - Cirrus logic 5429 ( 2mb , VLB ) ( $200 )
Audio - Sound Blaster Pro 2.0 ( ISA ) ( $300 )
Network - 3com 3c509 combo ( ISA ) ( $70 )
Controller - DTC-2278D, VLB ( 2 channels ) ( $60 )
CDROM - 2x Sony CDROM Drive with controller ( IDE ). ( $ 130 )
Floppy drives - 1.44mb. floppy and 5.25 1.2mb floppy drive. ( $100 )
Modem - US Robotics 2400 external modem. ( $150 )
SCSI - Adaptec AHA-1542CF ( ISA ) ( $100 )
Power supply - 300watt ( $60 )
Case - AT ( $75 )

OS - DOS 6.22 / Win3.11 ( $150 )

Estimated Total = $5,000+
——————————————————

I found this computer case on eBay.
It’s from a computer builder back in the 1990’s called “Techmedia”
It’s a nice design AT case. Could have been for a Pentium 1st gen computer.
I don’t know. But it should work nicely for this 486 build.
I like it because it has lots of room inside and it has a bay door cover to give it a clean simple look when closed.

Attachments

Last edited by Intel486dx33 on 2023-03-31, 16:50. Edited 58 times in total.

Reply 1 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

Photos of components:

Attachments

Last edited by Intel486dx33 on 2022-11-02, 09:26. Edited 4 times in total.

Reply 2 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

Some more photos:

Attachments

Last edited by Intel486dx33 on 2022-11-02, 09:28. Edited 7 times in total.

Reply 4 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t
mpe wrote on 2020-01-09, 00:27:

More a 1994 thing given by the DX4 and 5429.

In 1993 we were dreaming about DX2-66 and Pentium 60/66.

Okay, Let me change the title.

Thanks.

I will do a 1993 dream build later.

Reply 5 of 173, by Caluser2000

User metadata
Rank l33t
Rank
l33t

What is the point of the scsi controller? The vbl multi i/o card covers most things such as hdd, fdd. lpt. com etc.

There's a glitch in the matrix.
A founding member of the 286 appreciation society.
Apparently 32-bit is dead and nobody likes P4s.
Of course, as always, I'm open to correction...😉

Reply 6 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t
Caluser2000 wrote on 2020-01-09, 05:22:

What is the point of the scsi controller? The vbl multi i/o card covers most things such as hdd, fdd. lpt. com etc.

It's a Multimedia build, So I thought I throw it in for such things like SCSI scanners, CDROMS, External hard-drives, etc.

—————————-

Some Advent speakers with subwoofer.
Some of the first PC speaker manufactures to provide a subwoofer.
They sound good too.

Attachments

Last edited by Intel486dx33 on 2020-01-09, 11:19. Edited 4 times in total.

Reply 8 of 173, by appiah4

User metadata
Rank l33t++
Rank
l33t++

I had almost this exact PC in 1995, in a nearly identical tower case with a front flap door, with the following exceptions:

No SCSI setup
8MB RAM (32MB in 1994? I don't even remember reading about 32MB in a computer back then)
14.4Kbps modem

I thought I had an AMAZING PC.

Then Quake released the next year. *facepalm*

Retronautics: A digital gallery of my retro computers, hardware and projects.

Reply 9 of 173, by keropi

User metadata
Rank l33t++
Rank
l33t++

^ Quake (much like Doom) was a reason to upgrade so don't feel about it you were not the only one 🤣

🎵 🎧 PCMIDI MPU , OrpheusII , Action Rewind , Megacard and 🎶GoldLib soundcard website

Reply 10 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t
appiah4 wrote on 2020-01-09, 10:21:
I had almost this exact PC in 1995, in a nearly identical tower case with a front flap door, with the following exceptions: […]
Show full quote

I had almost this exact PC in 1995, in a nearly identical tower case with a front flap door, with the following exceptions:

No SCSI setup
8MB RAM (32MB in 1994? I don't even remember reading about 32MB in a computer back then)
14.4Kbps modem

I thought I had an AMAZING PC.

Then Quake released the next year. *facepalm*

Yes, My first 486 custom build in 1993 was the following

Specs:
ISA motherboard
Intel 486dx-33
64kb cache
120mb harddrive
4mb ram
2x Sony CDROM
IDE controller
1.44 and 5.25 floppy drive
Sound Blaster 16

I later upgraded it to a VLB motherboard with intel 486dx2-50 and 8mb ram and 4x CDROM.

———————————-

This posts is for DREAM build that I wish I could have had back in 1993/94.
The components are NOT entirely period correct.

Reply 11 of 173, by appiah4

User metadata
Rank l33t++
Rank
l33t++
Intel486dx33 wrote on 2020-01-09, 10:37:
Yes, My first 486 custom build in 1993 was the following […]
Show full quote

Yes, My first 486 custom build in 1993 was the following

Specs:
ISA motherboard
Intel 486dx-33
64kb cache
120mb harddrive
4mb ram
2x Sony CDROM
IDE controller
1.44 and 5.25 floppy drive
Sound Blaster 16

I later upgraded it to a VLB motherboard with intel 486dx2-50 and 8mb ram and 4x CDROM.

Interesting. In 1993 I bought a 486DX-33 as well, but mine had a 1MB VLB CL-GD542X (not entirely sure which), 213MB HDD, 4MB RAM, no CD-ROM, 1 3.5" Floppy and a SB Pro 2.0. It seems you paid up for the multimedia stuff whereas I paid up for the Hard Drive capacity and graphics card.

Retronautics: A digital gallery of my retro computers, hardware and projects.

Reply 12 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t
appiah4 wrote on 2020-01-09, 11:29:
Intel486dx33 wrote on 2020-01-09, 10:37:
Yes, My first 486 custom build in 1993 was the following […]
Show full quote

Yes, My first 486 custom build in 1993 was the following

Specs:
ISA motherboard
Intel 486dx-33
64kb cache
120mb harddrive
4mb ram
2x Sony CDROM
IDE controller
1.44 and 5.25 floppy drive
Sound Blaster 16

I later upgraded it to a VLB motherboard with intel 486dx2-50 and 8mb ram and 4x CDROM.

Interesting. In 1993 I bought a 486DX-33 as well, but mine had a 1MB VLB CL-GD542X (not entirely sure which), 213MB HDD, 4MB RAM, no CD-ROM, 1 3.5" Floppy and a SB Pro 2.0. It seems you paid up for the multimedia stuff whereas I paid up for the Hard Drive capacity and graphics card.

Yes, back in 1993
1mb ram = $100
1mb hard drive space = $1

How much was that SB Pro 2.0 back in 1993 ?

My Sony 2x CDROM was about $150

I wanted a Multimedia computer with CDROM and High end graphics and Sound card.
But I really did not know what I I was doing back then as computers were new to me and our schools was just starting to offer classes. So with the help of a friend who also was not to bright on computers we picked out the parts as best we knew.
We thought we were building a good computer but appearently not good enough.
So this post is about what I wanted back in 1993/94 as my first 486 computer.
32mb of ram might be over kill for DOS / Win3.11 but NOT for WinNT 3.51 and Win95.
So this is a Dream build and not a basic best value build.

Reply 13 of 173, by appiah4

User metadata
Rank l33t++
Rank
l33t++

I may be wrong but I think the SB Pro was slightly below $150 and the SB16 was almost double that.

Retronautics: A digital gallery of my retro computers, hardware and projects.

Reply 14 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

More photos:

Conner 240mb Hard drive from 1993
Intel 486dx4-100 CPU with fan/heatsink
4x CDROM drive.

Attachments

Reply 15 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

More Photos:

Attachments

Last edited by Intel486dx33 on 2021-05-01, 12:48. Edited 1 time in total.

Reply 16 of 173, by mpe

User metadata
Rank Oldbie
Rank
Oldbie
appiah4 wrote on 2020-01-09, 12:19:

I may be wrong but I think the SB Pro was slightly below $150 and the SB16 was almost double that.

This was in July 1993

Imagine getting BNIB Ad Lib Gold let alone SB Pro MCA for that amount of money today!

Attachments

  • jul1993.jpg
    Filename
    jul1993.jpg
    File size
    69.33 KiB
    Views
    7462 views
    File license
    Fair use/fair dealing exception

Blog|NexGen 586|S4

Reply 17 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

The Computer case just arrived today.
Wow !...This is the best AT case I ever had !...
It is made of thick steel construction like my HP Kayak computer.
I can wait to start putting this 486 computer together.

This is a great construction case for my Ultimate 486 build.
I am only going to put my best components in it.
It looks NEW and Never used.
It was probably a case for 1st gen. Pentium motherboard but will work good for a 486 motherboard too.

Attachments

Last edited by Intel486dx33 on 2021-06-02, 16:27. Edited 2 times in total.

Reply 19 of 173, by Intel486dx33

User metadata
Rank l33t
Rank
l33t

Here is what I have so far.
I am still looking for a good motherboard for this build as I want a really good one as this is a “Dream” build
And I want a good reliable 486dx4-100 motherboard.

I added all the drives and everything fits fine. It’s going to be a really nice build.
This will probably be the last 486 computer I build so I want to to be a good one.

Attachments