Almoststew1990 wrote on 2020-03-17, 23:36:

I bought an AGP 7600GS today which hopefully will bridge the gap between my GeForce 3 ti 200 and more modern PCIE cards, and used for games in the 2003 to 2005 range with a Pentium 4 or something.

That sounds right to me. I use a 7600GS on ASUS P4P800SE 3.00GHz .

Just received this beauty today:

Looks pristine, but untested by last owner due to not being able to find a suitable CPU. That's not going to be easy, but challenge accepted 😀
(that's a Socket 413...)

dionb wrote on 2020-03-18, 13:20:

Just received this beauty today: 15845370400300.jpg […]
Show full quote

Just received this beauty today:
15845370400300.jpg

Looks pristine, but untested by last owner due to not being able to find a suitable CPU. That's not going to be easy, but challenge accepted 😀
(that's a Socket 413...)

Mmh, PCIX.
What are your plans for the machine?

jaZz_KCS wrote on 2020-03-18, 13:41:

dionb wrote on 2020-03-18, 13:20:

Just received this beauty today: 15845370400300.jpg […]
Show full quote

Just received this beauty today:
15845370400300.jpg

Looks pristine, but untested by last owner due to not being able to find a suitable CPU. That's not going to be easy, but challenge accepted 😀
(that's a Socket 413...)

Mmh, PCIX.
What are your plans for the machine?

No PCI-X, that's just regular 64b 5V PCI.

Plans? Get it working, that would be cool enough. Run Win2kRC2 because I can- then install something else because no software for the platform 😜

dionb wrote on 2020-03-18, 13:20:

Just received this beauty today: 15845370400300.jpg […]
Show full quote

Just received this beauty today:
15845370400300.jpg

Looks pristine, but untested by last owner due to not being able to find a suitable CPU. That's not going to be easy, but challenge accepted 😀
(that's a Socket 413...)

When I try to Google for it I can't even find a Socket 413. Is this a non-x86 board or something?

It's called Socket FT1, or BGA413.

EvieSigma wrote on 2020-03-18, 14:11:

[...]

When I try to Google for it I can't even find a Socket 413. Is this a non-x86 board or something?

Yes. It's a Digital AlphaPC 164LX board, and it accepts AXP21164PC CPUs (400 or 533MHz).

They're not expensive, but very rarely come up for sale. Last one was one on CPU-world for USD 15 last Autumn.

derSammler wrote on 2020-03-18, 14:19:

It's called Socket FT1, or BGA413.

Er no, this is definitely for PGA CPUs, not BGA. Also about 14 years older.

dionb wrote on 2020-03-18, 14:26:

Yes. It's a Digital AlphaPC 164LX board, and it accepts AXP21164PC CPUs (400 or 533MHz). […]
Show full quote

EvieSigma wrote on 2020-03-18, 14:11:

[...]

When I try to Google for it I can't even find a Socket 413. Is this a non-x86 board or something?

Yes. It's a Digital AlphaPC 164LX board, and it accepts AXP21164PC CPUs (400 or 533MHz).

They're not expensive, but very rarely come up for sale. Last one was one on CPU-world for USD 15 last Autumn.

derSammler wrote on 2020-03-18, 14:19:

It's called Socket FT1, or BGA413.

Er no, this is definitely for PGA CPUs, not BGA. Also about 14 years older.

I had a feeling it was Alpha. Alpha hardware is still somehow in regular business use so finding it on the secondary market isn't the easiest.

CT1350B for $9 shipped.

Today's project.

A Radeon 9500 vanilla. It has the L shaped memory chip arrangement on the card.
These can, often times, be soft-modded with the Omega drivers, into a full fat 9700 with all the pipelines unlocked.
This was a success with this card and of course, I removed the stock cooler and that bloody die shim! I had to soak that yellow thermal cement they used in WD40 for quite a while before I could remove the shite. WTF?

Anyway, stuck on one of those cheap Chinesium vga coolers on there. They work a treat and are inexpensive. A vast improvement over stock. I'll stick some ram-sinks on if postie ever brings them.

Cleaned up the new case today. Not too bad now! Going to have to glue the 3.5" drive cover in as the plastic catch has snapped. Need to get a spare floppy out of the loft too. This system happily recognises my IDE-CF with 1gb card in so thats a bonus.
Also attached some of the internals that came with the machine.

Munx wrote on 2020-03-16, 08:32:

The flea markets I go to will be closed for a couple weeks due to the outbreak, but this weekend I still managed to get a few go […]
Show full quote

The flea markets I go to will be closed for a couple weeks due to the outbreak, but this weekend I still managed to get a few good items that will keep me entertained during that time:

Looks like the younger cousin of an Inwin S500. Is this an actual Inwin case or a clone?

wiretap wrote on 2020-03-18, 18:12:

CT1350B for $9 shipped. […]
Show full quote

CT1350B for $9 shipped.

Wow good price ! Hope it works

LewisRaz wrote on 2020-03-18, 22:29:

Cleaned up the new case today. Not too bad now! Going to have to glue the 3.5" drive cover in as the plastic catch has snapped. Need to get a spare floppy out of the loft too. This system happily recognises my IDE-CF with 1gb card in so thats a bonus.
Also attached some of the internals that came with the machine.

Nice ! Good looking case. I have one of those 30pin to 72pin adapters from back the 90's.

piatd wrote on 2020-03-19, 00:59:

Munx wrote on 2020-03-16, 08:32:

The flea markets I go to will be closed for a couple weeks due to the outbreak, but this weekend I still managed to get a few go […]
Show full quote

The flea markets I go to will be closed for a couple weeks due to the outbreak, but this weekend I still managed to get a few good items that will keep me entertained during that time:

Looks like the younger cousin of an Inwin S500. Is this an actual Inwin case or a clone?

Don't know, I could not find any markings on or in the case.

got some cpu trays... 🙁

imi wrote on 2020-03-19, 12:21:

got some cpu trays... 🙁

cputray.jpg

Good lord man, I hope you're not split on whether to contact the seller for a refund.

X-Fi Titanium Fatal1ty. I don't have a PCIE one yet, and this one was a decent price.

liqmat wrote on 2020-03-19, 15:07:

imi wrote on 2020-03-19, 12:21:

got some cpu trays... 🙁

cputray.jpg

Good lord man, I hope you're not split on whether to contact the seller for a refund.

I see what you did there x3
but yeah I already messaged the seller.

I only paid 4€ including shipping for both, that paper envelope was not enough evidently... I didn't expect them to be this brittle either.

I snatched this beauty off eBay, it's going to be fun diagnosing why they couldn't get it to power on. Also curious what the CPU speed is, 50 in the Prolinea means 50MHz but I dunno if that's also true of the Presario.

https://www.ebay.com/itm/Compaq-Presario-850- … .l2649#viTabs_0