Hi, just a quick question on voltages you get on molex connector for this PSU. I have a similar one Schrack Eletronics EG 071068-D P/N 1501438. When powered without anything connected, on molex connector I get the 5V (between groud black wire and red wire - as expected), and nothing for the expected 12V (between ground and green wire).
Wondering if this is expected behaviour... no experience with these power sources - tying to troubleshoot an IBM 5160 😀
NOTE:
- I am getting different readings after multiple restarts of the PSU without drives connected and without motherboard connected: 0L instead 12V most of the times, and seldom 11.25V
- when I manage to get 11.25V a few times in a row, I connect either 10MB HDD or 356k floppy drive, and I can read 11.91V instead 11.25V when there is nothing connected
Retro builds & sandbox
IBM XT 5160 | 286 | 386 | 486 | S4 SI5PI AIO & S4 Batman + P60 SX828
S8 & PPro 200 | SS7 FW 5VGF & Asus P5A & AOpen AX59PRO K6-III+ 550MHz
Asus K7M Athlon 1Ghz GDF | Abit SH6 Pentium III 1GHz SL4KL...