Is there any software that can read and display SMART attributes under Windows 9x ? \ VOGONS

Is there any software that can read and display SMART attributes under Windows 9x ?

Topic actions

First post, by darry

Posted on 2020-05-09, 01:53

darry Offline

Rank l33t++

Rank: l33t++
Posts: 5865
Joined: 2014-01-20, 06:27
Location: Canada

Basically, as the subject says . I tried a recent build of smartmontools and it actually ran under Windows 98SE, but can find no drives .
Maybe somebody can suggest a specific older version of smartmontools that works under Windows 9x or something else entirely ?

Before anyone asks, the drive is a Samsung 860EVO SSD currently on an ICH2's IDE port (through an adapter) under Windows 98 SE . Smartmontools under Linux has no trouble reading said SMART attributes on that setup, so it's not a controller/adapter incompatibility . The driver currently is the Windows default driver (with BHDD31 patched ESDI506.PDR , maybe that's an issue) . I tried with the Promise version of smartvsd.vxd (left over from previous controller) and Windows 98 SE native one (restored via System File Checker) .

Reply 1 of 7, by chrismeyer6

Posted on 2020-05-09, 01:57

chrismeyer6 Offline

Rank l33t

Rank: l33t
Posts: 2733
Joined: 2015-10-13, 16:16
Location: NJ, USA

Give speedfan a try the older versions support 9x and read smart data

Reply 2 of 7, by darry

Posted on 2020-05-09, 01:59

darry Offline

Rank l33t++

Rank: l33t++
Posts: 5865
Joined: 2014-01-20, 06:27
Location: Canada

chrismeyer6 wrote on 2020-05-09, 01:57:

Give speedfan a try the older versions support 9x and read smart data

Cool, thanks !

Reply 3 of 7, by chrismeyer6

Posted on 2020-05-09, 02:03

chrismeyer6 Offline

Rank l33t

Rank: l33t
Posts: 2733
Joined: 2015-10-13, 16:16
Location: NJ, USA

Your welcome best of luck with your project.

Reply 4 of 7, by darry

Posted on 2020-05-09, 03:26

darry Offline

Rank l33t++

Rank: l33t++
Posts: 5865
Joined: 2014-01-20, 06:27
Location: Canada

chrismeyer6 wrote on 2020-05-09, 02:03:

Your welcome best of luck with your project.

It works perfectly, thank again . Obviously, there are some attributes it does not know about (displays as unknown attribute, but still shows the values, which is fine), but I can't blame software from 15 years ago for not predicting the future. 😀

Reply 5 of 7, by chrismeyer6

Posted on 2020-05-09, 03:40

chrismeyer6 Offline

Rank l33t

Rank: l33t
Posts: 2733
Joined: 2015-10-13, 16:16
Location: NJ, USA

Excellent glad to hear you got it working.

Reply 6 of 7, by red-ray

Posted on 2020-05-09, 08:31

red-ray Offline

Rank Oldbie

Rank: Oldbie
Posts: 1402
Joined: 2019-05-21, 07:08
Location: England

darry wrote on 2020-05-09, 03:26:

Obviously, there are some attributes it does not know about (displays as unknown attribute, but still shows the values, which is fine), but I can't blame software from 15 years ago for not predicting the future. 😀

The current version of my SIV utility should report all the SMART attributes on all of Windows 9x/NT/2K/XP and later. If any attributes are unknown it should be easy enough to adjust things.

Reply 7 of 7, by computerguy08

Posted on 2020-05-10, 19:21

computerguy08 Offline

Rank Member

Rank: Member
Posts: 481
Joined: 2019-02-02, 16:40

Hard Disk Sentinel works well under Windows 98SE, it will display SMART values for most IDE / SATA storage devices.

There is also a DOS version with limited functionality.

Go to top of page Go to top of page

Back to General Old Hardware