First post, by B24Fox
- Rank
- Member
Hey all.
I recently got this Acorp 5VIA3-P Motherboard with a Pentium MMX @200mhz, and was looking forward to using an old 32MB DIMM which I kept since the late '90s (it has 2 "HY57V651620TC-10" chips, on each side), but the board won't POST or even beep.
It does, however, work fine with 72-pin SIMMs installed. So i'm thinking there must be a jumper somewhere that selects SIMM or DIMM.
I've been searching for a manual for days, but all the links i found are dead. And i know that a user here by the name of @raindog1975 has the same board.. but i'm new here, and am not allowed to PM anybody 🙁
Any help would be greatly appreciated!
Thanks.
P.S. here are some pictures of a board just like mine, if it helps.
https://39.img.avito.st/1280x960/6221869039.jpg
https://76.img.avito.st/1280x960/6221858776.jpg