VOGONS

Retro-unboxing: L.I.S. 2 indicator (NOS), VFD display & fan controller

Topic actions

First post, by ildonaldo

Posted on 
User metadata
Rank Member
Rank
Member

Hi,

I’ve just got my “new” L.I.S. 2 indicator* display & fan controller from around 2004.

The display came boxed and “as new”, but unfortunately the software-CD got lost over the time.
Thanks to evasive I've found some generic drivers,
but if you’ve got the latest retail USB-drivers and software for this display, please send it to me!

See here some pictures of the “unpacking” ...

The attachment 01.jpg is no longer available
The attachment 02.jpg is no longer available
The attachment 05.jpg is no longer available
The attachment 03.jpg is no longer available
The attachment 04.jpg is no longer available

The display appears to be new/unused (even the protective foil is still in place) and does not show any installation marks.
I intend to install the display & fan controller in my PC #3 (see sig), because it is in period and comes with a matching silver Lian Li case.

… to be continued 😀

* L.I.S. = Lost In Space (IMHO a bit strange name for a display)

Building my own PCs since 1991 - for my retro builds it's "no CF-disks, no Floppy emulators, no modern cases etc.", only the real and authentic stuff whenever possible.

Reply 1 of 10, by Doornkaat

Posted on 
User metadata
Rank l33t
Rank
l33t

I think Version 2.2.2.6 is the latest.

Reply 2 of 10, by Doornkaat

Posted on 
User metadata
Rank l33t
Rank
l33t

You already found that in the other thread as I see. Oh well, I'll leave it anyway in case the other source expires.

This might be the driver though. Please report back if it works.

Reply 3 of 10, by Doornkaat

Posted on 
User metadata
Rank l33t
Rank
l33t

Manual.
Sorry for messy posts.

Reply 4 of 10, by ildonaldo

Posted on 
User metadata
Rank Member
Rank
Member

I've now started to install the device with a temporary wiring in #3 😀

The attachment IMG_20200605_173351.jpg is no longer available

... to be continued 😉

Building my own PCs since 1991 - for my retro builds it's "no CF-disks, no Floppy emulators, no modern cases etc.", only the real and authentic stuff whenever possible.

Reply 5 of 10, by chrismeyer6

Posted on 
User metadata
Rank l33t
Rank
l33t

That's going to look great in that case once it's all done

Reply 7 of 10, by ildonaldo

Posted on 
User metadata
Rank Member
Rank
Member

It's alive!!! and raving 😉

If anyone can submit me the right software-code for this tool "mutimedia control center" for 'DEGREE CELSIUS' (U+2103???) it would be great.
many thanks, ildonaldo

The attachment LIS2_front.jpg is no longer available
The attachment LIS2_temp.jpg is no longer available

Building my own PCs since 1991 - for my retro builds it's "no CF-disks, no Floppy emulators, no modern cases etc.", only the real and authentic stuff whenever possible.

Reply 8 of 10, by chrismeyer6

Posted on 
User metadata
Rank l33t
Rank
l33t

Sweet. That looks great in that case!

Reply 9 of 10, by ildonaldo

Posted on 
User metadata
Rank Member
Rank
Member

Matches the 2003 case perfectly and it even manages the three fans for this case (dependent of the MoBo-Sensors).

Building my own PCs since 1991 - for my retro builds it's "no CF-disks, no Floppy emulators, no modern cases etc.", only the real and authentic stuff whenever possible.

Reply 10 of 10, by ildonaldo

Posted on 
User metadata
Rank Member
Rank
Member

... and please let me know how to set a longer delay than 10 sec. for the differen states in this software!

Building my own PCs since 1991 - for my retro builds it's "no CF-disks, no Floppy emulators, no modern cases etc.", only the real and authentic stuff whenever possible.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window