Aublak wrote on 2020-11-20, 03:33:

Went to see my e-waste guy today.

I want an e-waste guy too! 🤣

H3nrik V! wrote on 2020-11-20, 05:11:

Aublak wrote on 2020-11-20, 03:33:

Went to see my e-waste guy today.

I want an e-waste guy too! 🤣

Just look around for an e-waste recycler nearby.

Also prepare to get really dirty. Lots of the stuff I pull is dusty, rusty, or needs serious repair.

Good find Aublak!

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Aublak wrote on 2020-11-20, 03:33:

Went to see my e-waste guy today. […]
Show full quote

Went to see my e-waste guy today.

-PCChips M919 v3.4B/F

I haven't tested anything yet, but everything looks like its in great condition.
Both of those motherboards take a propietary cache card. I was kinda confused when I first saw them. Luckily my e-waste guy handed me one of those cache cards. Interestingly the Rhino 6 seems to accept both styles of L2 cache.

The M919 is exactly what I wanted in a Socket 3 board; VLB, PCI, coin battery, EDO ram, I/O ports, etc. I hope it works.

That's an incredible selection! Lucky find 😁
Be aware though, the M919 needs a specific cache module that says "FOR 486 M919 USE ONLY" on the back. There's also 2 versions of that cache module for 3.3v (M919-01S3) or 5v (M919-02S5) CPU / operation. So use it without L2 cache for now. Someone made a PCB for new cache sticks here. I found 2 of them in a junk lot of while back - and I've already got a known good one in my M919, so I should really put those 2 up for sale 😀

brostenen wrote on 2020-11-20, 11:51:

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga) The […]
Show full quote

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Post the link.

wiretap wrote on 2020-11-20, 12:27:

brostenen wrote on 2020-11-20, 11:51:

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga) The […]
Show full quote

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Post the link.

Here you go sir... 😀 😀 The Github page....

EDIT:
I found this line of text on the page, that answers one of my questions that I have been wondering about.

Because the adapter board contains a configuration selector, the Amiga profile is already preselected and can be used directly.

This ultra-cute 386SX system, with cute 9" monitor and some additional stuff. Needs some repairs as the pins in the PSU socket are broken. Perhaps needs new PSU too. Shouldn't be too much of a problem. I bought it mostly for the ST351A/X XTA compatible HDD which seem to be hard to find nowadays.

brostenen wrote on 2020-11-20, 12:40:

wiretap wrote on 2020-11-20, 12:27:

brostenen wrote on 2020-11-20, 11:51:

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga) The […]
Show full quote

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Post the link.

Here you go sir... 😀 😀 The Github page....

Can you do a lag test for this?

appiah4 wrote on 2020-11-20, 12:42:

brostenen wrote on 2020-11-20, 12:40:

wiretap wrote on 2020-11-20, 12:27:

Post the link.

Here you go sir... 😀 😀 The Github page....

Can you do a lag test for this?

The only test that I can do, is to explain how I experience it side by side with my CRT television that can take RGB signal through the Scart port.
However, I will explain it on a blog-post that I am planning to write about this adaptor. Personally I do not have any tools that can do a real in dept lag-test.

EDIT:
I did however watch the youtube clips about the universal and external version. There is some side-by-side recordings of Tandy games, CRT and LCD side-by-side. I just forgot about it, because I watched the two videoes last night at 3am.

Thermalwrong wrote on 2020-11-20, 12:21:

Aublak wrote on 2020-11-20, 03:33:

Went to see my e-waste guy today. […]
Show full quote

Went to see my e-waste guy today.

-PCChips M919 v3.4B/F

I haven't tested anything yet, but everything looks like its in great condition.
Both of those motherboards take a propietary cache card. I was kinda confused when I first saw them. Luckily my e-waste guy handed me one of those cache cards. Interestingly the Rhino 6 seems to accept both styles of L2 cache.

The M919 is exactly what I wanted in a Socket 3 board; VLB, PCI, coin battery, EDO ram, I/O ports, etc. I hope it works.

That's an incredible selection! Lucky find 😁
Be aware though, the M919 needs a specific cache module that says "FOR 486 M919 USE ONLY" on the back. There's also 2 versions of that cache module for 3.3v (M919-01S3) or 5v (M919-02S5) CPU / operation. So use it without L2 cache for now. Someone made a PCB for new cache sticks here. I found 2 of them in a junk lot of while back - and I've already got a known good one in my M919, so I should really put those 2 up for sale 😀

Thanks for the heads up.

Yeah I haven' been able to completely identify the module that I have. It fits in the slot, that's all I know.

Hi everyone,

It seems that a lot of nice "treasures" are being found and rescued by fellow vogoners.

This week I manage to find some treasures of my one.

A nice Sound Blaster AWE 64 Gold, @ 75€ including shipping (this cards are getting stupidly expensive 😒 )

A Roland usb to midi cable, a "must have to play" with dosbox and midi synthesizers.

And at last a big box copy of "TOCA Turing Car Championship" @ 8€, but what made me jump to it was the claim to use almost all accelerators under the sun:

Aublak wrote on 2020-11-20, 12:48:

Thermalwrong wrote on 2020-11-20, 12:21:

Aublak wrote on 2020-11-20, 03:33:

Went to see my e-waste guy today. […]
Show full quote

Went to see my e-waste guy today.

-PCChips M919 v3.4B/F

I haven't tested anything yet, but everything looks like its in great condition.
Both of those motherboards take a propietary cache card. I was kinda confused when I first saw them. Luckily my e-waste guy handed me one of those cache cards. Interestingly the Rhino 6 seems to accept both styles of L2 cache.

The M919 is exactly what I wanted in a Socket 3 board; VLB, PCI, coin battery, EDO ram, I/O ports, etc. I hope it works.

That's an incredible selection! Lucky find 😁
Be aware though, the M919 needs a specific cache module that says "FOR 486 M919 USE ONLY" on the back. There's also 2 versions of that cache module for 3.3v (M919-01S3) or 5v (M919-02S5) CPU / operation. So use it without L2 cache for now. Someone made a PCB for new cache sticks here. I found 2 of them in a junk lot of while back - and I've already got a known good one in my M919, so I should really put those 2 up for sale 😀

Thanks for the heads up.

Yeah I haven' been able to completely identify the module that I have. It fits in the slot, that's all I know.

With those 4 chips, that should be a 512KB pipeline burst COAST, nice for that socket 7 board.

brostenen wrote on 2020-11-20, 12:40:

Here you go sir... :-) :-) The Github page.... […]
Show full quote

wiretap wrote on 2020-11-20, 12:27:

brostenen wrote on 2020-11-20, 11:51:

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga) The […]
Show full quote

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Post the link.

Here you go sir... 😀 😀 The Github page....

EDIT:
I found this line of text on the page, that answers one of my questions that I have been wondering about.

Because the adapter board contains a configuration selector, the Amiga profile is already preselected and can be used directly.

Awesome, thank you. 😀

Also this beautiful thing arrived in the mail today. It has Suntac motherboard, IIT 287 fpu and hercules compatible video adapter. HDD is missing, but that's not a problem. Monitor is the one I recovered from the trash pile some time ago...

brostenen wrote on 2020-11-20, 11:51:

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga) The […]
Show full quote

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Very cool project and much needed to. Thanks for sharing !!

Got RAM?
I already have enough kilos of ram, but i could not pass up this, for about free. 30pin simms

Wow that's a ton of ram. Nice find

wiretap wrote on 2020-11-20, 14:18:

brostenen wrote on 2020-11-20, 12:40:

Here you go sir... :-) :-) The Github page.... […]
Show full quote

wiretap wrote on 2020-11-20, 12:27:

Post the link.

Here you go sir... 😀 😀 The Github page....

EDIT:
I found this line of text on the page, that answers one of my questions that I have been wondering about.

Because the adapter board contains a configuration selector, the Amiga profile is already preselected and can be used directly.

Awesome, thank you. 😀

No problemo. I hope you enjoy the reading. 😀

Xicor wrote on 2020-11-20, 15:28:

brostenen wrote on 2020-11-20, 11:51:

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga) The […]
Show full quote

Bought an adaptor for Amiga, that sits between the Denise chip and the motherboard of an Amiga500 or Amiga2000. (OCS Amiga)
The magic is, that I can attach an RaspberryPI-Zero, load up some software on the SD card and have HDMI-Output on the Amiga.
Anyone interrested, I can give a link to the Github page, were there is an mail address for the maker of the adaptor.
There are an Super-Denise version as well.

I will post pictures, once I have it all bought, installed and working.

EDIT:
The original product/solution, is an external scandoubler/upscaler-kind-of-thing'y, for MULTIPLE COMPUTERSYSTEMS/CONSOLES. 😜
And probably the most cheap one that delivers a solid result for the price. No more cheap solutions from China.

Part One:
https://www.youtube.com/watch?v=8lnaI7TY0qQ

Part Two:
https://www.youtube.com/watch?v=xGO3N1ThHFA

But the adaptor I bought is an internal solution.... I like internal Amiga upgrades over external ones.
(And no, I am not the one in those two videoes, just the only in dept video's that I have found)

Very cool project and much needed to. Thanks for sharing !!

Thanks. And no problemo. As CRT's are getting rare, like ultra rare, these days. Then we need something universal and cheap. And perhaps this is a solution for all Vogons users.