VOGONS


First post, by soviet conscript

User metadata
Rank Oldbie
Rank
Oldbie

Does anybody have any info on this card? I can't find any drivers specifically for it nor much info on the "dream" wavetable that appears built in. I did find ATC-930 as a possible model number after looking up the FCC ID but can't dig up any drivers specific to it. I'll try generic 930 drivers when I get a chance.

Attachments

Reply 1 of 7, by Joseph_Joestar

User metadata
Rank Oldbie
Rank
Oldbie

I have a generic OPTi 82C930 without the Dream chip. It's a very nice card.

The drivers that I use are attached in this thread: OPTi 82C930 review

PC#1: Pentium MMX 166 / Soyo SY-5BT / S3 Trio64V+ / Voodoo1 / OPTi 82C930 / AWE64
PC#2: Celeron 466 / Abit ZM6 / Voodoo3 / AWE64 Gold / YMF744 / SC-155
PC#3: AthlonXP 1700+ / Abit KT7A / GeForce4 / SBLive / ALS100
PC#4: Athlon64 3700+ / DFI LanParty / 9600GT / X-Fi Titanium

Reply 2 of 7, by soviet conscript

User metadata
Rank Oldbie
Rank
Oldbie
Joseph_Joestar wrote on 2021-03-15, 05:34:

I have a generic OPTi 82C930 without the Dream chip. It's a very nice card.

The drivers that I use are attached in this thread: OPTi 82C930 review

Thanks, ill give those drivers a try. Anyone have any opinion on the Dream chips there or can anyone pick out the OPL chip? I tried Googleing the chips but none point to being an OPL clone that I can see.

Reply 3 of 7, by pc-sound-legacy

User metadata
Rank Newbie
Rank
Newbie

OptI 930 has integrated opl3 clone (OptiFM). But some cards with Dream wavetable also use the Dream FM-emulation (Terratec Maestro 32/96 as an example). You then will notice it because Dream-FM sounds different to opl3.
The Dream 9233 is a solid wavetable with good rolandish sound, nothing wrong with it as far as I can tell. Generic OptI driver should work, as well as unisound. Make sure mixer settings are correct and aux isn't muted. Aktivate MPU401 at Adresse 330 and you should be ready to go with it.

Reply 4 of 7, by Joseph_Joestar

User metadata
Rank Oldbie
Rank
Oldbie
pc-sound-legacy wrote on 2021-03-16, 00:08:

OptI 930 has integrated opl3 clone (OptiFM).

You are probably thinking of the 931 model.

Most OPTi 930 cards that I've come across use 1:1 OPL3 copies, which sound identical to the real thing. Additional info can be found here: http://www.os2museum.com/wp/opl3-copies/
Assuming that website is accurate, this is what it says about the 930 chip:

Once again, the OPTi 82C930A does not include an OPL3 core (unlike its successor, the 82C931).

PC#1: Pentium MMX 166 / Soyo SY-5BT / S3 Trio64V+ / Voodoo1 / OPTi 82C930 / AWE64
PC#2: Celeron 466 / Abit ZM6 / Voodoo3 / AWE64 Gold / YMF744 / SC-155
PC#3: AthlonXP 1700+ / Abit KT7A / GeForce4 / SBLive / ALS100
PC#4: Athlon64 3700+ / DFI LanParty / 9600GT / X-Fi Titanium

Reply 5 of 7, by keropi

User metadata
Rank l33t++
Rank
l33t++

^ which means that the SAM9233 is used for FM in this particular card, it will be terrible 🤣 🤣 🤣

🎵 PCMIDI mpu site
🎧 Orpheus soundcard site
Action Rewind site
💻 WTB Amstrad PC7486SLC-33

Reply 6 of 7, by pc-sound-legacy

User metadata
Rank Newbie
Rank
Newbie
Joseph_Joestar wrote on 2021-03-16, 03:48:
You are probably thinking of the 931 model. […]
Show full quote
pc-sound-legacy wrote on 2021-03-16, 00:08:

OptI 930 has integrated opl3 clone (OptiFM).

You are probably thinking of the 931 model.

Most OPTi 930 cards that I've come across use 1:1 OPL3 copies, which sound identical to the real thing. Additional info can be found here: http://www.os2museum.com/wp/opl3-copies/
Assuming that website is accurate, this is what it says about the 930 chip:

Once again, the OPTi 82C930A does not include an OPL3 core (unlike its successor, the 82C931).

You're absolutely right - OptI 930 won't have internal OPL clone. I mixed it up with OptI 931 and 933. So yes if there is no external FM on this card it might be the Dream emulating FM. Here is an example / comparison of DreamFM on the Terratec Maestro (Dream SAM9233 as well but 4mb rom)

https://youtu.be/X2anCViLx-4