First post, by kingcake
- Rank
- Oldbie
Gateway select Slot A system with Athlon 700 and AMD 751 chipset.
System powers on and shuts down fine in Win98SE from colt boot.
When told to restart from Win98SE system hangs at blank screen with POST codes C2, CC.
Shift + Reset from Win98SE works fine.
Keyboard lights do flash indicating at least the keyboard controller resets.
+5V -- OK
+12V -- OK
RESET Line -- OK
Power Good -- OK
If this was a 386 I would blame the keyboard controller, but it's all just emulated in a "modern" chipset like this.