Hello everyone, I got a Toshiba T4600C laptop who had the usual P30 error so it didn't power on. I replaced the usual 6.3v 1000uf on the DC board (and in addition the 2x6.3v 1500uf), and all the little 6.3v 33uf, 16v 33uf... dispatched on all parts of the card and having a plastic shell (I took the photos before replacing them all). Now the computer turns on perfectly, but it doesn't start, the screen doesn't turns on, on the LCD status screen there is only the power plug and the icon indicating it is turned on, the HDD is powered, but no start. Visually the computer is in very good condition. Any advice welcome ! Thanks.