First post, by tobiasrieper
As the title describes I can’t for the life of me get this Matrox G2+ working on Win98SE. In DOS 6.22 the card works perfectly have tested Duke3d, Doom and Raptor.
I have tried installing Matrox Drivers 5.25, 5.52 in Safe Mode as Well as Normal mode. I’ve also done a clean install, installed the card without any chipset drivers (se installs MS drivers for system devices ) I’ve tried intels chipset drivers 2.80 and 3.20 to no avail.
Sometimes It loads up with the desktop but no Matrox utilities are installed, sometimes windows screen goes completely black until I reboot into safe mode. When I’m in safe mode the card says it’s installed but I can’t see any Matrox programs in the program files.
It’s like the cards half installed. I’ve made sure my monitor says plug and play (I don’t get a list of refresh rates)
I’ve also reflashed the bios with Matrox official utility (3.3)
Any idea where I’m going wrong?
My S3 cards are all PCI (work fine) the Matrox is AGP (my board is a Vobis motherboard and can’t find a suitable bios update , it’s still on P01.
Driving me a bit nuts to be honest x
Thanks 😀