I have a P5I430VX-250DM Explorer II motherboard with a Pentium 166. At this moment i want to test a Pentium 200 MMX, for this i need to change the voltage, CPU type and CPU frequency. However the motherboard doesn't have jumpers... This is normal? 😁
Motherboard manual: http://www.elhvb.com/mobokive/archive/Qdi%20- … ls/430vxe22.pdf
how i can modify this values?
Thank you
Get jumpers.
As long as the jumper headers are still there.
Main PC: Dual Xeon X5690@4.6ghz, Evga - SR-2, 48gb memory, Intel X25-M g2 SSD and a Nvidia GTX 980 ti.
Retro PC #3: K6-2 450@500mhz, PC-Chips m577, 256mb sdram, AWE64 and a Voodoo Banshee.
wrote:Get jumpers.
As long as the jumper headers are still there.
there is no place to put the jumpers...
Then I guess you have to solder headers to the board.
Or find another board.
I can not see any empty spots for extra VRMs so I think you have what you need in that regard.
Main PC: Dual Xeon X5690@4.6ghz, Evga - SR-2, 48gb memory, Intel X25-M g2 SSD and a Nvidia GTX 980 ti.
Retro PC #3: K6-2 450@500mhz, PC-Chips m577, 256mb sdram, AWE64 and a Voodoo Banshee.
:\
any suggestions for a new motherboard (socket 7)?
