Orchid Righteous 3D II Voodoo2 card driver problem \ VOGONS

Orchid Righteous 3D II Voodoo2 card driver problem

Topic actions

First post, by dawnrazor45

Posted on 2020-08-14, 05:50

dawnrazor45 Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2020-08-12, 23:07

Searching for Drivers , Orchid Righteous 3D II Voodoo2 card

well I downloaded this driver, installation was without problems, but when I open the control panel of this card I got this message:

and seem than the card don´t work, the test fail to run , somebody can give me a clue about this? sadly I don´t have another driver for this card.
I have installed nvidia m64 driver , then the orchid card, and last run the directx9 setup

Thanks !

Reply 1 of 3, by darry

Posted on 2020-08-14, 06:24

darry Online

Rank l33t++

Rank: l33t++
Posts: 6529
Joined: 2014-01-20, 06:27
Location: Canada

Does the card appear without issues in device manager with the correct driver loaded ?

Reply 2 of 3, by dawnrazor45

Posted on 2020-08-15, 03:24

dawnrazor45 Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2020-08-12, 23:07

Hi darry , yes. everything is fine

Reply 3 of 3, by darry

Posted on 2020-08-15, 03:50

darry Online

Rank l33t++

Rank: l33t++
Posts: 6529
Joined: 2014-01-20, 06:27
Location: Canada

First, I would start with a visual inspection of the card. Look for broken traces, missing components and/or shorted pins on chips . Posting high resolution photos of both sides of the card would also be a good idea, to get some more eyes on your card .

Maybe you could try a different PCI slot and, AFAIK, you should be able to use the 3DFX reference drivers or even the FastVoodoo2 ones on the Orchid Righteous 3D II . You might want to try either of those .

Go to top of page Go to top of page

Back to Video