Anaxagoras wrote on Yesterday, 09:43:Yes, I’ve understood. The original CGA card has an RCA video output. But I think that model – the CGA installed in the original […]
Show full quote
Ozzuneoj wrote on Yesterday, 07:07:Sorry if I'm misunderstanding what you're saying, but he was just saying to use the IBM CGA card (Color Graphics Adapter) that m […]
Show full quote
Anaxagoras wrote on Yesterday, 06:46:
Thanks rmay635703, good to know. But It sounds very expensive, at least to me.
Sorry if I'm misunderstanding what you're saying, but he was just saying to use the IBM CGA card (Color Graphics Adapter) that many IBM PCs and XTs would have originally come with. Specifically, the card shown here (they will have either a green or brown PCB). The RCA jack on it is a basic composite video output, so you can connect it directly to any TV with a composite video (yellow) input.
An XT would normally have come with one of four IBM video cards... Either a CGA card, a Monochrome Display Adapter card, or less commonly an Enhanced Graphics Adapter card... or if someone was made out of money, a rare and stupidly expensive Professional Graphics Controller card.
If your system didn't come with a video card or didn't come with an IBM CGA card, then you're probably best off just getting an OAK or Trident card will connect to a VGA monitor unless you can find an IBM CGA card cheap. There are some interesting things you can do with the composite video out on a CGA card (video demos that do crazy things to output more colors), but that's a pretty specific use case.
Yes, I’ve understood. The original CGA card has an RCA video output. But I think that model – the CGA installed in the original IBM PC-XT – is more expensive than the Trident 9000 VGA and probably hard to find too.
Of course, I know that there are different things.
The problem, or my scenario, is the following:
- PC-XT clone with CGA adapter.
- Monochrome monitor (12'') that’s about to stop working (used in my current setup).
- TV (14").
- TFT (17'').
To be honest, I don’t know what the best setup is for using my PC-XT without spending too much money.
I think the Trident 9000 graphics card plus a TFT monitor is a cheap option, but it means sacrificing the original look and feel.
Of course, the best thing would be to replace the current monitor with a ‘new’ one, but it’s very difficult to find one in good condition, it’s too heavy to post, and I don’t know how long I’ll be able to use it for.
For the other hand the original CGA card with video output to use in TV is the best option in terms of look and feel.
At the moment I created two searches on eBay, one for Trident card and other for CGA with video output.
Ah, I see. Unless I missed it, you hadn't stated previously that you were using a clone or what video card it came with. In general, if someone has an IBM PC XT (5160), there's a good chance they have an IBM CGA card which can connect to an NTSC TV easily. If it's a clone, then that all changes of course. Being in a PAL region means that CGA output to a TV may be problematic for you anyway, as others have mentioned (I hadn't thought of this).
If there's any chance of finding a VGA CRT that someone is getting rid of, that would probably be the best compromise. At that point you'd be able to use any VGA card that can operate in an 8bit ISA slot.
I found a pretty detailed discussion with lists here:
https://forum.vcfed.org/index.php?threads/8bi … ga-cards.26866/
I have only used an OAK OTI-037 for this (with jumpers I believe), but it seems there are lots of options and some VGA chips are autosensing. Those, presumably, can work in an 8bit slot even if there is no obvious jumper to switch modes.
Now for some blitting from the back buffer.