VOGONS


Display options for a PC-XT

Topic actions

Reply 20 of 25, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

I think if he already had the RCA composite in the back of his PC he wouldn't be asking. Many cards and systems omitted it. I've got a couple.

Another source of the composite signal might be a header on the CGA board. They can be 2 pin or 4 pin, usually half the 4 pin is a on off jumper for mono/color.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 21 of 25, by rmay635703

User metadata
Rank l33t
Rank
l33t
BitWrangler wrote on Yesterday, 15:31:

I think if he already had the RCA composite in the back of his PC he wouldn't be asking. Many cards and systems omitted it. I've got a couple.

Another source of the composite signal might be a header on the CGA board. They can be 2 pin or 4 pin, usually half the 4 pin is a on off jumper for mono/color.

Yeah if I had the like option I would hit

You would think Spain would have better equip't TVs than the trash we got here (SCART, multi region, TTL VTR, etc)

My android is blocking me from copying a direct link for some reason but this is what I was thinking if a vintage solution was desired.

https://www.google.com/url?sa=i&source=web&rc … 795189161899000

Even here in the US I have one small sony with a 8 color VTR connector that should sort of work with cga but again pal might throw a wrench in that.

Locally to me I can buy a $5 RF adapter for composite to channel 3 but PAL probably throws a wrench in that.

Ah well, vga it is.

Reply 22 of 25, by Ozzuneoj

User metadata
Rank l33t
Rank
l33t
Anaxagoras wrote on Yesterday, 09:43:
Yes, I’ve understood. The original CGA card has an RCA video output. But I think that model – the CGA installed in the original […]
Show full quote
Ozzuneoj wrote on Yesterday, 07:07:
Sorry if I'm misunderstanding what you're saying, but he was just saying to use the IBM CGA card (Color Graphics Adapter) that m […]
Show full quote
Anaxagoras wrote on Yesterday, 06:46:

Thanks rmay635703, good to know. But It sounds very expensive, at least to me.

Sorry if I'm misunderstanding what you're saying, but he was just saying to use the IBM CGA card (Color Graphics Adapter) that many IBM PCs and XTs would have originally come with. Specifically, the card shown here (they will have either a green or brown PCB). The RCA jack on it is a basic composite video output, so you can connect it directly to any TV with a composite video (yellow) input.

An XT would normally have come with one of four IBM video cards... Either a CGA card, a Monochrome Display Adapter card, or less commonly an Enhanced Graphics Adapter card... or if someone was made out of money, a rare and stupidly expensive Professional Graphics Controller card.

If your system didn't come with a video card or didn't come with an IBM CGA card, then you're probably best off just getting an OAK or Trident card will connect to a VGA monitor unless you can find an IBM CGA card cheap. There are some interesting things you can do with the composite video out on a CGA card (video demos that do crazy things to output more colors), but that's a pretty specific use case.

Yes, I’ve understood. The original CGA card has an RCA video output. But I think that model – the CGA installed in the original IBM PC-XT – is more expensive than the Trident 9000 VGA and probably hard to find too.

Of course, I know that there are different things.
The problem, or my scenario, is the following:
- PC-XT clone with CGA adapter.
- Monochrome monitor (12'') that’s about to stop working (used in my current setup).
- TV (14").
- TFT (17'').

To be honest, I don’t know what the best setup is for using my PC-XT without spending too much money.
I think the Trident 9000 graphics card plus a TFT monitor is a cheap option, but it means sacrificing the original look and feel.
Of course, the best thing would be to replace the current monitor with a ‘new’ one, but it’s very difficult to find one in good condition, it’s too heavy to post, and I don’t know how long I’ll be able to use it for.

For the other hand the original CGA card with video output to use in TV is the best option in terms of look and feel.

At the moment I created two searches on eBay, one for Trident card and other for CGA with video output.

Ah, I see. Unless I missed it, you hadn't stated previously that you were using a clone or what video card it came with. In general, if someone has an IBM PC XT (5160), there's a good chance they have an IBM CGA card which can connect to an NTSC TV easily. If it's a clone, then that all changes of course. Being in a PAL region means that CGA output to a TV may be problematic for you anyway, as others have mentioned (I hadn't thought of this).

If there's any chance of finding a VGA CRT that someone is getting rid of, that would probably be the best compromise. At that point you'd be able to use any VGA card that can operate in an 8bit ISA slot.

I found a pretty detailed discussion with lists here:
https://forum.vcfed.org/index.php?threads/8bi … ga-cards.26866/

I have only used an OAK OTI-037 for this (with jumpers I believe), but it seems there are lots of options and some VGA chips are autosensing. Those, presumably, can work in an 8bit slot even if there is no obvious jumper to switch modes.

Now for some blitting from the back buffer.

Reply 24 of 25, by Grem Five

User metadata
Rank Oldbie
Rank
Oldbie

I used this list when I got VGA cards for my 5160s. https://minuszerodegrees.net/5160/vga/5160_vga.htm#cards

I can confirm AST VGA Plus, ATI VGA WonderXL and Orchid ProDesigner IIs work in 5160, still looking for a reasonable priced Video Seven model.

Still havent tested EGA,CGA and MDA modes on all but all should do them according to manuals. (still havent tested the mouse on the WonderXL)

Reply 25 of 25, by pavunoDev

User metadata
Rank Newbie
Rank
Newbie

If you're not looking to continue using an OG CGA monitor, I'd go for a RGBtoHDMI adapter and use a modern monitor. You're looking at 60-70 euro in Spain and you'd be set permanently, pretty much.

Something like this:

+---------------------------+
| IBM PC / XT |
| CGA card (DE-9 RGBI out) |
+---------------------------+
|
| DE-9 straight-through cable
| (male-to-female, pin 1:1)
v
+---------------------------+
| RGBtoHDMI (PC edition) |
| CGA input board |
| Raspberry Pi Zero |
| 5V micro-USB power |
+---------------------------+
|
| Mini-HDMI to HDMI cable
v
+---------------------------+
| HDMI-to-VGA converter | <-- Only if monitor lacks HDMI
| (active adapter) |
+---------------------------+
|
| VGA cable
v
+---------------------------+
| VGA TFT monitor |
+---------------------------+

Can't seem to get this diagram pretty, but should be understandable. Apologies.