cyclone3d wrote on 2021-05-19, 01:43:
Th files all look correct to me. I thought it may be something with my system but I've tried multiple floppies and it always has […]
cyclone3d wrote on 2021-05-19, 00:05:
Just as an FYI, the installer on the driver disk doesn't work for the package you put on vogonsdrivers. Says that it can't load the script.
I have another copy of the disks and the installer works fine.
Pierre32 wrote on 2021-05-19, 00:11:
Thanks for the heads up. They would have worked for me in the past of course. I'll test them on the impending install and see if I've done anything wrong when repackaging for upload.
Th files all look correct to me. I thought it may be something with my system but I've tried multiple floppies and it always has the same problem. Maybe the zip or upload got corrupted or something.
I noticed on my copy that it doesn't copy over all the .ld files so I may make a customized install script that does just so I don't have to copy them over manually.
I've confirmed that there was something wrong in the package I uploaded, but the original disks I made were working fine. The only difference I could see in the files was that INSTALL.BAT was 20 bytes (working) vs 19 bytes (not working). They both contain the same simple line "instalit dsp16.inf" so I can't explain why they would differ or how that happened. Anyway, thanks for reporting and I'll fix my uploads.
You're right about it not copying over all the .ld files too. I guess the stock installer only cares about copying over DSP001.ld - a detail I had missed after doing so much manual file wrangling at the time. I spent way too long tonight wondering why my card had installed fine but wasn't making any noise. It was because I'd loaded DSP001WA.ld in config.sys but the file wasn't there, d'oh! Perhaps I could also add "copy *.ld" to the install script before re-uploading.
cyclone3d wrote on 2021-05-17, 03:25:
What does your system report when you run DSP16ver ?
Mine currently reports 41.117
"DSP16ver Version 1.0......dsp firmware revision is 1.07"