Running TL866+ Xgecu software on Linux Mint 21 doesn't work (solved) \ VOGONS

Running TL866+ Xgecu software on Linux Mint 21 doesn't work (solved)

Topic actions

First post, by Nexxen

Posted on 2022-11-03, 15:56

Nexxen Offline

Rank l33t

Rank: l33t
Posts: 2029
Joined: 2020-03-05, 13:37
Location: Italy

I tried using wine to detect the USB device but after a couple of guides I can't make it detect it.
USB isn't available.

Does anyone have a clue on how to make it work. Currently I have to use a laptop with Windows on it and it slows things down.

Thanks for any input.

Guide I tried, but .dll can't be downloaded:
Using the XGecu TL866II Plus Under Linux with Wine
04 Jul 2018

Last edited by Nexxen on 2023-08-22, 20:33. Edited 1 time in total.

PC#1 Pentium 233 MMX - 98SE
PC#2 PIII-1Ghz - 98SE/W2K

Reply 1 of 6, by cde

Posted on 2022-11-06, 21:39

cde Offline

Rank Member

Rank: Member
Posts: 385
Joined: 2018-07-19, 11:48

You can try the "minipro" software which is native. It works fine with SPI flash but has trouble with NAND. https://gitlab.com/DavidGriffith/minipro

Reply 2 of 6, by majinga

Posted on 2022-11-07, 17:25

majinga Offline

Rank Newbie

Rank: Newbie
Posts: 31
Joined: 2022-10-23, 15:39

Have you set the udev rules correctly?

To use the original sofware with wine you can use the wrapper from radioman: https://github.com/radiomanV

Reply 3 of 6, by Nexxen

Posted on 2022-11-07, 18:29

Nexxen Offline

Rank l33t

Rank: l33t
Posts: 2029
Joined: 2020-03-05, 13:37
Location: Italy

majinga wrote on 2022-11-07, 17:25:

Have you set the udev rules correctly?

To use the original sofware with wine you can use the wrapper from radioman: https://github.com/radiomanV

I tried following radiomanv instructions but it doesn't work anyway, there are errors.
I use linux but I'm not an expert.

https://github.com/radiomanV/TL866/tree/master/wine
sudo cp ./udev/* /etc/udev/rules.d/ && sudo udevadm trigger

returns an error for unknown directory

PC#1 Pentium 233 MMX - 98SE
PC#2 PIII-1Ghz - 98SE/W2K

Reply 4 of 6, by majinga

Posted on 2022-11-11, 17:47

majinga Offline

Rank Newbie

Rank: Newbie
Posts: 31
Joined: 2022-10-23, 15:39

Can you return the specific error?

Are you in the correct directory while you launch the command?

Reply 5 of 6, by Nexxen

Posted on 2022-11-12, 23:05

Nexxen Offline

Rank l33t

Rank: l33t
Posts: 2029
Joined: 2020-03-05, 13:37
Location: Italy

majinga wrote on 2022-11-11, 17:47:

Can you return the specific error?

Are you in the correct directory while you launch the command?

I'll do it again following the instructions and I'll report every step.

PC#1 Pentium 233 MMX - 98SE
PC#2 PIII-1Ghz - 98SE/W2K

Reply 6 of 6, by Nexxen

Posted on 2023-08-22, 18:36

Nexxen Offline

Rank l33t

Rank: l33t
Posts: 2029
Joined: 2020-03-05, 13:37
Location: Italy

I followed every step on 2 new machines and it worked.
My guess is some corrupted files not working. Go figure...

I have to admit I upgraded from version 18 to 21... maybe it was time for a fresh install.
I can call it
- The End -

PC#1 Pentium 233 MMX - 98SE
PC#2 PIII-1Ghz - 98SE/W2K

Go to top of page Go to top of page

Back to Milliways