Hi, all.
I'm in search of a ICS952603 datasheet.
It's a PLL chip, which was used in P4\P4-M era motherboards.
Any info on that IC would be highly appreciated.
what exactly do you need? plenty of boards use this exact chip
Soltek SL-86SPE2-L22 https://theretroweb.com/motherboard/manual/sl … 70385989428.pdf
gigabyte GA-8I845PE Pro https://www.eserviceinfo.com/downloadsm/80062 … 20Rev.1.01.html page 19
https://github.com/raszpl/sigrok-disk FM/MFM/RLL decoder
https://github.com/raszpl/FIC-486-GAC-2-Cache-Module (AT&T Globalyst)
https://github.com/raszpl/386RC-16 ram board
https://github.com/raszpl/440BX Reference Design adapted to Kicad
rasz_pl wrote on 2023-04-18, 08:01:what exactly do you need? plenty of boards use this exact chip
I need pinout and a programmable register table.
An experiment to find an alternative PLL chip to drive a Pentium-M on 266Mhz (4x66.6mhz clock) bus instead of 400/533.
rasz_pl wrote on 2023-04-18, 08:01:gigabyte GA-8I845PE Pro https://www.eserviceinfo.com/downloadsm/80062 … 20Rev.1.01.html page 19
Thanks! I found the exact same schematic yesterday.
Seems like I can use any "CK409 Compliant Clock Synthesizer" datasheet for reference, e.g. ICS952606
Absence of any official documentation for ICS952603/RTM363-205 is strange though.
maybe RTM363-205 is same as RTM363-210 https://datasheetspdf.com/pdf-file/706049/REA … EK/RTM363-210/1
https://github.com/raszpl/sigrok-disk FM/MFM/RLL decoder
https://github.com/raszpl/FIC-486-GAC-2-Cache-Module (AT&T Globalyst)
https://github.com/raszpl/386RC-16 ram board
https://github.com/raszpl/440BX Reference Design adapted to Kicad
or maybe 952601 has same pinout ? It is also CK409 clock...probably already checked it but just in case 😀
https://pdf1.alldatasheet.com/datasheet-pdf/v … 52601YFLFT.html
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
There are differences in pinouts and number of clock lanes between CK-409 compatible ICs, but at least there's a schematic with a ICS952603 pinout.
Thanks! That is something I can work with now.
Thanks Yeah had trouble getting the schem pdf for some reason and I see it now.
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
